Troubleshooting Hub and Spindle Not Fitting Together after Replacing Spindle on a Utility Trailer
Question:
I expected to replace a hub easily. I bought a hub with 1 1/16 inner and outer bearings and a 1 1/4 rear seal. The main part of the spindle is 1 1/16 and the slightly larger shoulder near the welded area is 1 1/14. I expected that the pre greased hub would fit right over ... maybe need a few bumps with a hammer on a wood block and then press in the outer bearing into its race and put on the castle nut. But I cannot get the hub on far enough to start the castle nut because there are no threads to start it sticking out ! I did this once several years ago and did not have a problem. It seems so simple and Im not a dope and pretty handy with mechanical and tool stuff. The front bearing is pressed into its race, the rear bearing is trapped in its race by the inside rear black seal that is 1 1/4 ID. I must be missing something obvious but cannot figure it out. Surely somebody else has run in to this problem... Ideas?
asked by: Doug H
Expert Reply:
It sounds and looks to me like you have the wrong hub assembly for the spindle that is welded to the axle on your trailer. The photos you sent clearly show a 1-1/16 inch spindle similar to the BTR EZ Lube Spindle item # TRU44FR. This is a spindle for a 2,000 pound axle.
The parts that you referenced are for a 3,500 pound axle and definitely will not work on a spindle designed for a 2,000 pound axle. In addition, the photo of the hub that you sent looks like a hub for a 3,500 pound axle, but from the photo I cannot be sure of the capacity of the hub. You will need to remove the inner and outer bearings to determine if the hub you have is the correct hub for the spindle you have. The inner and outer bearings for a 1-1/16 inch spindle are both # L44649 and the seal is the # 10-9 or # 10-60 seal. The bearing kit for this size spindle is the Bearing Kit for 1.25 inch BTR Spindle, L44649 Inner/Outer Bearings, 10-60 Seal, item # BK1-150. The hub kit for this spindle, with a 5 on 4-1/2 inch bolt pattern, will be the Trailer Hub Assembly - 2000 lbs Axle - 5 on 4-1/2 - L44649 Bearings - 8 inch - 10 inch Wheels, item # 8-259-5UC1.
A hub for a 3,500 pound axle will have a different inner bearing. Our Trailer Hub Assembly - 3,500 lbs Axles - 5 on 4-1/2, item # 84545BX, has an outer bearing the same as the # L44649 bearing for a 2,000 pound axle spindle, but has an inner bearing # L68149.
If you need a hub to fit the 1-1/16 inch spindle on your trailer, and the bolt pattern of the wheel is 5 on 4-1/2 inches, the Trailer Hub Assembly - 2000 lbs Axle - 5 on 4-1/2 - L44649 Bearings - 8 inch - 10 inch Wheels, item # 8-259-5UC1, would be the correct assembly for your trailer.
If you need a spindle for a 3,500 pound axle to fit a hub with # L44649 outer and # L68149 inner bearings you will need item # TRU64FR.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: idler hub
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Video: Review of Timken Trailer Bearings Races Seals Caps - Double Lip Grease And Oil Seal - TMK58ZR
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258-50UC1 Review
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Can I Install Trailer Wheels on my Truck to Match my Trailer
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Search Results: hub bearings
- Search Results: window
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearings - L44649
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-259-5UC1 Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-259-5UC1-EZ Review
- Search Results: trailer tongue handle
- Search Results: anchor light
- Search Results: led trailer brake light
- Search Results: timken l68149
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-2K
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-1K Review
- Q&A: How to Determine Replacement Hubs for a Trailer Based on Spindle Dimensions
- Shop: Trailer Hitch
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Q&A: Replacement Bearing Kit for a 2018 Grand Design Imagine 2800BH
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Replacement Hub for 2005 Eagle Boat Trailer