Replacement Cradle Recommendation for a Thule Atlantis 1800 Cargo Box

Question

Question:

which part represents the replacement for the cradle on the original cargo box. atlantis 1800

asked by: Jerry

0

Expert Reply:

The replacement Cradle for your Atlantis 1800 Cargo Box is part # TH8523387001.

I spoke with my contact at Thule and they told me that the cradle has been redesigned so you will have to purchase a new screw, part # TH05728 for each cradle you purchase. These items are all sold individually.

expert reply by: Jameson C

0

Answer 1

Thank you for the picture! So right off I can say that you will need to get more than 1 of the Replacement Cradle #TH8523387001. Since it's a different design than the other 3 I recommend picking up 2 of these and using them for the Quick Grip…

view full answer...

Answer 2

Yes, you can use replacement cradle #TH8523387001 for the Quick Grip mounting system in your Thule Atlantis 1600 cargo box. This cradle works with both the Quick Grip and AcuTight mounting systems in the current and previous generation Thule cargo…

view full answer...

Answer 3

Thank you for the pictures you submitted. Based on them I was I was able to determine that your box uses the Quick Grip Mount Assembly #TH05738 and the #TH8523387001 for cradles.

view full answer...

Answer 4

The Replacement Thule AcuTight Cradle #TH8523387001 is a single cradle while the Thule Snapfit Cradle Replacement Kit #TH68NB contains 4 cradles and 4 screws.

view full answer...

Answer 5

The replacement Cradle for your Atlantis 1800 Cargo Box is part #TH8523387001. I spoke with my contact at Thule and they told me that the cradle has been redesigned so you will have to purchase a new screw, part #TH05728 for each cradle you purchase.…

view full answer...

Answer 6

The replacement key you need is #THKEYN108.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Cradle Recommendation for a Thule Atlantis 1800 Cargo Box

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching