Footplate Recommendation to Replace Wheel Caster on Trailer Tongue Jack

Question

Question:

Hello- I am looking to replace the drop tongue wheel to a footplate on my travel trailer that has a max weight of 6000lbs. Which do you recommend? I only want to buy this once. thank you for the support and I hope you have a great day.

asked by: Tom

0

Expert Reply:

The Pro Series Footplate, part # PS1400700340, is a great choice for a replacement footplate on your trailer jack. The footplate features a snapper pin so no additional clip is needed to secure the foot.

I've linked a video for you to take a look at.

expert reply by: Victoria B

0

Answer 1

I do have an option for you to replace the bottom plate of your trailer jack with a wheel assembly. The option I have is the Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs #PS1400750340. This…

view full answer...

Answer 2

You can replace your trailer's jack foot plate with a trailer caster wheel. Your tongue weight capacity will be the lowest of three numbers, 1.) the new caster wheel capacity, 2.) the old tongue jack capacity, or 3.)the trailers stated…

view full answer...

Answer 3

Boat jacks, including the Fulton jack you have, are typically constructed so that the inner tube of the jack and the yoke and caster are all one piece. Because of the way its constructed, the caster won't easily turn until the boat is…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Footplate Recommendation to Replace Wheel Caster on Trailer Tongue Jack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching