Will Classic Accessories Fifth Wheel Cover Fit PullRite Model 2900 SuperGlide

Question

Question:

What cover in your product line do you recommend that best fits a PullRite Model 2900 SuperGlide Hitch?

asked by: Chris T

1

Helpful Expert Reply:

The best recommendation I can give you to determine if we have a fifth wheel hitch cover that will work on your Pullrite Superglide 2900 would be to first determine the dimensions of your hitch and then compare them to the dimensions of the Hitch Cover part # CA80116.

This cover measures 24" wide x 24" long x 18" tall.

We had one customer say it didn't work on their Pullrite hitch (didn't say what model), so I would recommend you measure yours before ordering.

expert reply by: Jameson C

1

Answer 1

The Reese 5th Wheel Trailer Hitch Cover #RP30055 is a great option for a cover that will fit the head of the B&W Companion 20K #BWRVK3300. If you are looking for something that more or less drapes over the hitch then I recommend going with the…

view full answer...

Answer 2

Fifth wheel hitch cover #RP30055 is designed to fit Reese 5th hitch heads (not the whole hitch) but you could use it on a B&W Companion. The cover is roughly 18 by 28 inches and though it is contoured more for Reese hitches you could still use it…

view full answer...

Answer 3

We have a couple cover options that will work nicely with your B&W Companion Slider #BWRVK3400. For something that will just cover the hitch head we have the Reese part #RP30055. This is a really nice cover that secures over the hitch using an…

view full answer...

Answer 4

I have not heard anything along the lines of a custom cover for the B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 being manufactured. Currently the Classic Accessories Cover for 5th Wheel Trailer Hitch #CA80116 is the best cover for…

view full answer...

Answer 5

We had a customer come back and say the Fifth Wheel Cover part #CA80116 that you referenced fit well on their Elite Reese hitch like yours. I attached a picture as well that shows it being installed on an Elite hitch.

view full answer...

Answer 6

I do have an option for you but was unable to locate one specific to the B&W. We have Cover #CA80116. The cover is sized to be universal fit with measurements of 24" wide, 24" length and 18" tall. It utilizes 4 hooks or straps to…

view full answer...

Answer 7

Glad to hear that you are enjoying your 5th wheel sliding hitch! We do have some cover options that will work great for you. If you are just wanting to cover the hitch head you can use the Reese 5th Wheel Trailer Hitch Cover #RP30055. Although it was…

view full answer...

Answer 8

You can use the Classic Accessories Cover #CA80116 with your B&W Companion Hitch 3405 #BWRVK3400. This is a universal fit cover as currently there is not a custom fit hitch cover from B&W.

view full answer...

Answer 9

Hi Mark; thanks for the question and I have some good news for you as we have the exact 5th wheel to gooseneck adapter to replace the Turning Point pin box on your Jayco Eagle HT 30.5 CKTS. The correct part is the following: - Gen-Y Hitch Shock…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

view full answer...

Will Classic Accessories Fifth Wheel Cover Fit PullRite Model 2900 SuperGlide

Product Page this Question was Asked From

Continue Researching