5TH Wheel Hitch Cover For a B&W Companion RVK3405 Sliding 5TH Wheel Hitch

Question

Question:

Looking for a hitch cover for BandW companion hitch model #3405

asked by: Stephen C

0

Expert Reply:

You can use the Classic Accessories Cover # CA80116 with your B&W Companion Hitch 3405 # BWRVK3400. This is a universal fit cover as currently there is not a custom fit hitch cover from B&W.

expert reply by: Bud M

0

Answer 1

The Air Lift LoadLifter 7500 XL part #AL57596 is a confirmed fit for your 2014 Ford F-250 short bed and does not require any additional brackets due to the exhaust design. I attached an install video for this kit on a similar 2014 Ford F-250 for…

view full answer...

Answer 2

For a B&W Companion hitch I recommend using a 10 inch diameter lube plate. We have the Reese Lube Plate, #RP83002, which is my top choice, and the Curt 10 inch Fifth Wheel Trailer Hitch Lube Plate, #16721, both of which will work nicely with…

view full answer...

Answer 3

Glad to hear that you are enjoying your 5th wheel sliding hitch! We do have some cover options that will work great for you. If you are just wanting to cover the hitch head you can use the Reese 5th Wheel Trailer Hitch Cover #RP30055. Although it…

view full answer...

Answer 4

The Reese 5th Wheel Trailer Hitch Cover #RP30055 is a great option for a cover that will fit the head of the B&W Companion 20K #BWRVK3300. If you are looking for something that more or less drapes over the hitch then I recommend going with…

view full answer...

Answer 5

You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

5TH Wheel Hitch Cover For a B&W Companion RVK3405 Sliding 5TH Wheel Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching