What Hitch Is Available to Fit A 2005 Or 2006 Volkswagen Rabbit
Question:
Will this hitch fit a 2005 VW Rabbit? If Not do you make one? Or what is the difference between 05/06?
asked by: Ray D
Expert Reply:
The new body style VW Rabbit was introduced to the US as a 2006 model. I do not have a listing for a 2005 VW Rabbit, just a Golf. You might check to see if your VW Rabbit might be a 2006 model.
The Draw-Tite Class I Hitch, # 24679, will fit on a 2006 VW Rabbit but not the GTI V6 models. It attaches to the vehicles trunk floor. It has a gross towing weight capacity of 2,000 lbs. and a tongue weight capacity of 200 lbs.
With the # 24679 hitch if you will be towing you will need the Draw-Tite Ball Mount, # 3594, and the Tow Ready 2 Inch Hitch Ball, # 19258.
To install the # 24679 hitch it does require you to drill holes into the trunk floor.
You will need the Tow Ready 2 Inch Hitch Ball, # 19258.
The wiring kit needed for the 2006 VW Rabbit is the Wiring Harness, # C59496. It is designed for the Volkswagen with the multiplex wiring systems.
I am sending links to the instructions on both of the hitches and to the wiring kit.
Products Referenced in This Question
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Replace an RV Roof Vent Cover
- Q&A: Can Trailer Tires be Used on a Tow Dolly
- Article: Rooftop Cargo Carriers
- Q&A: How to Use Stabilizing Strap on a 2000 VW Beetle with a Curt Hitch and Thule T2 Classic Bike Rack
- Q&A: Installation Torque Values/Specs for Draw-Tite Trailer Hitch # 75282
- Q&A: Replacement 18-3/8" Long Double Eye Leaf Spring for Yacht Club Pontoon Trailer
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Receiver Sizes
- Q&A: WFCO WF-9960 Replacement Converter
- Q&A: What is the Air Pressure Rating for a 4.80-12 Load Range C Trailer Tire
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Which Hitches are Made in the USA