Tire Chains for 1996 Ford F-250 with 285/75R16 Tires

Question

Question:

Looking for snow chains to fit tire size 285/75R16 for a pickup. Would like chains with V-bar and without a cam adjuster. Didnt find any on your website. Do you have any chains as described above?

asked by: Alan A

1

Helpful Expert Reply:

For steel snowchains with V-Bar links and no cams to fit your truck equipped with 285/75-16 tires you should use the Titan Chain # TC3829 chains. We recommend that you additionally use the # PW105 rubber tensioners to help keep the chains tight and centered. These will also be suitable for off-road use.

expert reply by: Adam R

1

Answer 1

Class S chains are designed for vehicles with more restricted clearances in the wheel wells. Class U chains are for vehicles with more wheel well clearances. If your owners manual calls for Class S you would not have the clearance for a Class U…

view full answer...

Answer 2

Yes, the Titan tire chains part #TC3829CAM are correct for your tire size of 285/75-16 that is in a Load Range of E. These are a really great option for deep snow and ice since they are V-bar.

view full answer...

Answer 3

For icy conditions you would want to go with a V-bar style chain that has the ability to crush ice as you drive through it. For that the part #TC3829 is a fit for your tire size of 285/75-16 and would work well. Be sure to check the owners manual…

view full answer...

Answer 4

From the sound of your question, I assume you meant the #PW3029C instead of "TC3029C." Also, it sounds like you have size 275/70-18 tires on your 2017 Ford F-350 Super Duty (single rear wheel). Per the Ford user's manual, I…

view full answer...

Answer 5

According to the owner's manual, Ford doesn't state any prohibitions regarding using snow tires on your truck as long as you're not using 20 inch wheels, so you'll be good to go. Of the two V-bar chains available for…

view full answer...

Answer 6

I wish there was an easy solution I can recommend but Air Lift will void your warranty if you run lower than 5 psi in the bags and the compressor kit won't let you do that anyway. 5 psi SHOULDN'T make it unbearably stiff so I'd hate to…

view full answer...

Answer 7

It would be a bit redundant and in reality would give you a pretty harsh ride if both systems were engaged but it is possible to install RoadActive Suspension kit part #RAS3611-SLHD at the same time as an Air Lift kit part #AL57596. If you found…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey John, Thanks for the purchases and you have everything you need except the wedge. I verified directly with Reese that the correct wedge to use with the Demco Recon 5th Wheel Trailer Hitch #DM8550043 and Reese Sidewinder #RP34FR is the following:…

view full answer...

Tire Chains for 1996 Ford F-250 with 285/75R16 Tires

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching