Brake Controller Recommendation for a 2015 Nissan Frontier

Question:

Hello I NEED THREE ITEMS FOR 2015 NISSAN FRONTIER 1. ELECTRIC BRAKE CONTROLLER FOR ONE AXLE OR TWO WHEELS 2. HARDNESS FROM CONTROLLER TO NISSAN WIREING THESE ITEMS SEEM EASY TO FIND 3. TWO WIRE BLACK AND BLUE WIRE FROM FACTORY CONNECTION TO 7 CONTACT RV TRAILER CONNECTION HARD TO FIND? NOTE I HAVE LIGHTS ALREADY CONNECTED BUT NOT ELECTRIC BRAKES AND HAVE 7 CONTACT RV HOOKUP WITH UNCONNECTED BLUE BLACK AND YELLOW WIRES NOT CONNECTED IN BACK OF TRUCK THANK YOU

asked by: Stanley

Expert Reply:

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885 for your 2015 Nissan Frontier. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.

To install this controller would only require the # 3050-P harness, but it sounds like the 7-way on your vehicle doesn't have all of the wires ran to it. I have a solution for this though too. You would use the # 3050-P to power the controller and tap into the stoplight circuit but then you would need a length of 10 gauge wire (part # 10-1-1) from the brake output circuit of the controller to the brake output circuit of the 7-way (blue wire). The # 10-1-1 is sold by the foot so you will need to order a quantity of the amount of feet you will need.

expert reply by: Jameson C