Is 2013 Ford F-350 Factory Brake Controller Compatible with Electric Over Hydraulic Trailer Brakes
Question:
2013 Ford Super duty 350 integrated trailer brake controller - will it work with any of the Disc brake kits you sell for my 5th wheel toy hauler which has 3 axles at 7 thousand pounds apiece .
asked by: Darwin
Expert Reply:
The Hydrastar electric over hydraulic braking system # HBA16 is compatible with the factory brake controller in your 2013 Ford F-350 without needing an adapter. I have linked a video review of this actuator for you.
I have included a link to the disc brake kits we carry for 7,000 pound axles. Raw finish kits such as # K2HR712 will be the most cost effective while dacromet and stainless kit # K2HR758DDS will cost the most. Raw finish brakes will be susceptible to corrosion where as with darcomet/stainless it will not be much of an issue if it is at all.
For a triple axle brake line kit I recommend # HS496-253 which uses all flexible hose which is ideal for disc brakes since the calipers move in and out.
Products Referenced in This Question
Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Hydrastar Hydraulic Brake Line Kit - Triple Axle - 25' Long, 3/16" Main Line
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 25 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Triple Axle
- Hydrastar
more information >
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Raw Finish - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet and Stainless - 7K Dexter Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
Hydrastar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Adapters
- Hydrastar
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Correct Gen-Y Pin Box to Replace a MORryde RPB72-1716
- Q&A: Troubleshooting Trailer Brake Module Fault on 2022 Ford F-350 with Factory Controller
- Article: 2023 Holiday Must Haves
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Is the Hydrastar Electric Over Hydraulic Acatuator Adapter Module Needed for a 2024 Ford
- Q&A: Is the HBA-CAM Adapter Needed for a 2023 Ford F-350
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Q&A: How To Install HBA-CAM Hydrastar Adapter
- Q&A: Is a Electric Over Hydraulic Brake Actuator Adapter Needed For 2024 Chevrolet Factory Brake Control?
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)