Installation of Roadmaster EZ5 Base Plate Kit RM-521567-5

Question

Question:

Who can install this part for me, the Honda Dealer or ? 2012 Honda CR-V Roadmaster EZ5 CODE: Rm-521567-5

asked by: Craig C

0

Expert Reply:

Installation of base plates like the Roadmaster EZ5 kit # RM-521567-5 can be done by the end user or by a local shop if you prefer. The linked instructions outline the process and include color photos to help illustrate. I also linked an install video showing this kit installed on a 2014 CR-V.

The linked article on flat towing may be of interest; it details all of the items needed for safe and legal flat towing.

expert reply by: Adam R

0

Answer 1

Converters are required when a vehicle has what is called a 3-wire or separate lighting system. These systems will have turn signal circuits that are separate from the brake light circuits. Trailers use a 2-wire or combined system meaning the brake…

view full answer...

Answer 2

The correct replacement circuit board for your MaxxFan 7000k unit is the part #MA10A21275K that you referenced. The different letter in the part number is just a slight change they made but does not affect application.

view full answer...

Answer 3

The replacement printed circuit board for your MaxxFan Delux Item #MA00-07500K is Item #MA10A21275K.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 8

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 9

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 10

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 11

Hello Curtis. You can absolutely use an RV mount tow bar with your 2006 Ford E350 Van. For example, the Blue Ox Avail Non-Binding Tow Bar #BX7420 is compatible with any 2" hitch receiver. This could be on a motorhome, van or pickup truck. As…

view full answer...

Answer 12

Hi Randy, For your 2022 Jeep Gladiator I have the following flat towing component recommendations: Baseplate: If you have a standard model with a factory bumper or a Rubicon with a factory bumper then you can use the Roadmaster Direct-Connect Base…

view full answer...

Installation of Roadmaster EZ5 Base Plate Kit RM-521567-5

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching