Does The Curt Trailer Hitch Include Mounting Hardware and Wiring For 1996 Ford Probe
Question:
Is any mounting hardware or wiring included in this or is it only the frame of the hitch receiver? Thank you
asked by: Jared C
Expert Reply:
On the Curt # C11720, for the 1996 Ford Probe the mounting hardware is included. It does not come with any wiring. The wiring harness you would need is the Wiring, # C59496. You also need the ball mount # C45521 and pin and clip # F-4.
The hitch ball you will need will depend on the trailer coupler size you will be towing. The most common size hitch ball is the 2 inch ball. For the 2 inch ball you will need the Tow Ready 2 Inch Hitch Ball, # 19258. If you have a 1-7/8 inch ball then you will need the Tow Ready 1-7/8 Inch Hitch Ball, # 19256.
You will want to check the owners manual or the car dealer for the maximum towing capacity of your 1996 Ford Probe to make sure that your vehicle will be able to handle the capacities of the hitch you will be installing.
Please note that for all non-trailering loads an auxillary support strap is required to be used like # 18050
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >