Height of the Replacement Bent Towing Receiver SP325

Question

Question:

What are the dimensions of the P325XC Bent Towing Receiver? I am trying to determine if it will raise the bicycle rack above the brake lights and license plate of our Arctic Fox 29L travel trailer

asked by: Avner L

0

Expert Reply:

For the part # SP325 it will measure 17-3/8 inches from top of ballmount sleeve to top of bent tube.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I have a great alternative for you. Unfortunately, the Hollywood Racks Sport Rider SE #HLY84FR does not come with/allow you to attach a ramp to the rack. However, for a bike rack that has a ramp and can hold your e-bike, I recommend the Yakima OnRamp…

view full answer...

Answer 2

I do have an option that will allow you to use a bike rack on the rear of the vehicle while towing a tow dolly, however, there currently are not any dual hitch adapters that will allow you to use a 10" drop ball mount and remain within your…

view full answer...

Answer 3

The best bike rack option you have to carry heavier e-bikes at the rear of a motorhome is the Hollywood Racks E-Bike Rack part #HLY84FR as it's one of the few racks we offer that can carry a 70 lb bike like what you have and is also approved for…

view full answer...

Answer 4

I do have another option available but The Hollywood Rack RV Rider Bike Rack #HLY64FR does not have a ramp that it is compatible with. The best option for a bike rack with a ramp is The Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4 inch…

view full answer...

Answer 5

Yes, the Swagman Traveler XCS #S64664 that you referenced will work great mounted on a Roadmaster All Terrain Falcon tow bar part #RM-522. I attached a picture of this bike rack attached to a similar tow bar for you to check out as well.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 9

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 10

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 11

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

view full answer...

Answer 12

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Height of the Replacement Bent Towing Receiver SP325

Continue Researching