bing tracking image
Q & A Icon

How Does the 35 Foot Wishbone 4-Way Trailer Wiring Harness # A35W42B Function  

Question:

Not really sure what you are offering. Will I run brown/green down one side and yellow/ brown down the other or just the four wires down the trailer and then wishbone to the left and right light? I need 17 feet of wire to run to a separation point that requires 7 feet on each side to go to lights that are supported by pvc pipes. I primarily fish saltwater and want something that is sealed from hitch all the way down trailer, splitting off and then going to two separate places. Thanks for your time.

0

Expert Reply:

The way that the 35 foot Wishbone 4-Way Trailer Wiring Harness, # A35W42B, works is instead of having 1 taillight wire (brown) that you would need to splice into in order to run to both taillights, this harness has two wires (one attached to each stop/turn signal wire). The wires are attached to each other (except at the 4-Way connector) so you cannot mix them up.

This would be good for your application since you will not have to splice wires that could end up being exposed to the water. I have included a video featuring the installation of this wiring harness below.

expert reply by:
0
Michael H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>