Wiring Harness for 2012 Honda Pilot with Factory Hitch

Question:

I recently purchased a 2012 Honda Pilot and it has the tow hitch - however it is not wired. What do I need to purchase to fully wire my vehicle and being to use trailer with lights, etc.

asked by: Toni

Expert Reply:

We have great wiring harness options for your 2012 Honda Pilot.

If your trailer has a 4-Way flat trailer connector, you will want the Tow Ready T-One Vehicle Wiring Harness # 118558. This wiring harness for your Pilot will not require any cutting or splicing of wires to install. The converter and converter harness will instill inside the cargo area behind a panel and the 4-Way harness will install into a gray plug under the vehicle bumper on the driver's side.

If your trailer has a 7-Way round, blade-style connector, you will want the Tow Ready Vehicle Wiring Harness # 118265. This will provide you with a 7-Way trailer connector at the rear of the vehicle. This converter will also install in a panel inside the cargo area, while the trailer connector harness installs under the vehicle bumper.

The installation instructions of both of these wiring harnesses are attached for you.

expert reply by: Victoria B

David P.

6/11/2020

I have 2112 Honda Pilot all-wheel drive and U-haul want to order a pt#9030 Voyager brake control and a pt#cmf51393 and wsp5 to install. Is this any good for $163 installed.

Chris R.

6/15/2020

The Tekonsha Voyager is a really solid brake controller. I was able to find that the cmf51393 part number you mentioned refers to a Curt 4-Way harness but I wasn't able to find any info on the wsp5 part. I this a 7-Way wiring kit, by chance?

Cory B.

4/26/2020

Do you have a 7 round and a 4 flat connector for a 2012 Honda pilot

Chris R.

4/28/2020

The best option for adding both a 7-Way and 4-Way to your 2012 Honda Pilot is with the Tekonsha 7-Way Harness # 118265 and an adapter like the Pollak # PK12716 to use when needed. The Tekonsha harness provides you with a simple plug-and-play 7-Way that will be and the adapter plugs into the 7-Way itself to give you a 4-Way at the other end.