How To Use Optional # PTSCLK12 Cable Lock Kit for Kuat Transfer 2 Bike Rack

Question

Question:

are the cables in the lock kit long enough to reach the frame in the front bike? The photo makes the cables look very short with them attaching to the rear of the rack.

asked by: Sam B

0

Expert Reply:

The cable lock kit for the Kuat Transfer Bike Rack, part # PTSCLK12 includes locks for two bikes. The cable locks would install in the end of the bars that secure the bikes to the TS02G rack, as shown in the diagram I've provided from the instructions.

expert reply by: Mike L

0

click to enlarge

Answer 1

The Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks part #HLT comes with a 1/2" diameter bolt/pin. It can be used in both 1-1/4" receiver tubes with a 1/2" hitch pin hole and because it threads into the shank on the bike rack can…

view full answer...

Answer 2

If you look at the provided diagram, you can see the replacement parts that Yakima offers for your Ridgeback Bike Rack. If what you're needing isn't shown, please let me know what you're needing. Zip strips #Y8890297 Endcap #8890306…

view full answer...

Answer 3

There are a few ways to tell if you have a pre-2016 or post-2016 Yakima FrontLoader Wheel Mount Bike Carrier part #Y02103. The best way to tell is to look for the date code sticker which is usually located near the front wheel holder. The easiest way…

view full answer...

Answer 4

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

view full answer...

Answer 5

The integrated cable locks that come on the Kuat NV 2.0 Base #BA22B automatically lock when you connect the 2 ends together. When you put the key in and turn it you are actually unlocking it which is why they pop out. If you skip to the 4:15 mark on…

view full answer...

Answer 6

The Thule T2 Pro XTR 2 Bike Platform Rack - 2" Hitches #TH83JV is designed to hold the bikes by the wheels. It is not recommended to use on bikes with fenders. For that application I recommend the Hollywood Racks Sport Rider SE #HLY84FR. This…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

While Draw-Tite has confirmed that the Max-Frame Trailer Hitch Receiver #DT22MR will fit your 2023 Kia Sportage we have not had one in to install in our facility for images. I reached out to Draw-Tite and they confirmed that there is no additional…

view full answer...

Answer 11

Yes, it does! I checked with Curt and I can confirm that their item #C94WR hitch fits all models of the 2024 Kia Sportage including the hybrid. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity, and a 525 lbs…

view full answer...

Answer 12

Hey Chris, Yes, the trailer hitches you're seeing (listed below) are a confirmed fit for all models of the Kia Sportage from 2023 - 2024. Draw-Tite Max-Frame Trailer Hitch Receiver #DT22MR Curt Trailer Hitch Receiver #C94WR etrailer Trailer Hitch…

view full answer...

How To Use Optional # PTSCLK12 Cable Lock Kit for Kuat Transfer 2 Bike Rack

Product Page this Question was Asked From

Continue Researching