How to Know if the Hub part # 84545UC1-EZ Will fit an Axle Spindle
Question:
Hello, Im considering purchasing part # 84545UC1-EZ for a 3500 lb. Dexter Axle for a gooseneck stock trailer. Both axles were replaced a few months ago, but the vendor sold me axles with two different bolt patterns one is a 5inch on 4.5inch brake axle and the other a 5inch on 5inch idler axle. The trailer originally had the 5inch on 4.5inch on both axles as all the original rims fit that pattern. Rather than have to carry two spare tires, or replace the entire axle, is it possible to remove the 5inch on 5inch idler hub and replace it with a 5inch on 4.5? That way, I will only have to carry one spare. I wasnt sure if the part number listed above would be easily interchangeable. Thank you,
asked by: Shaun C
Helpful Expert Reply:
Most likely you would be able to remove the 5 on 5 inch hub of your trailer axle and replace it with the part # 84545UC1-EZ but you are going to need to verify that this hub will fit your spindle.
In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If the bearing numbers are L68149 and L44649 this hub would fit and work well for you. Or if the measurements on the spindle are 1.06 and 1.38 inches.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Video: CE Smith Trailer Hub Assembly Review and Installation
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Loadstar ST205/75D15 Bias Trailer Tire w/ 15" Black Mod Wheel - 5 on 4-1/2 - Load Range C
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13511 Review
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Q&A: Picking Out Replacement Axle for Snowbear 550LHD Trailer
- Q&A: Will Switching From a Drop Axle to a Straight Axle Increase Tire Clearance
- Q&A: Can a 2,500 Pound Drop Axle Be Upgraded to 3,500 Pound Straight Axle
- Q&A: Right Replacement Hubs for a Trailer with 3500 Pound Axle and 5 on 4-1/2 Bolt Pattern
- Search Results: axle grease
- Search Results: grease
- Q&A: Can a Trailer Spindle with Grooves Still be Used if Bearing Fits
- Q&A: Replacement Dexter Idler Trailer Hub With 8-248 and T20 Stamped on Back Of Hub
- Q&A: What is Hub Bore Diameter of Dexter Hub part # 84545UC1-EZ
- Search Results: lock n roll
- Video: Review of TruRyde Trailer Spindles - Agricultural Spindle - TRU34FR
- Search Results: d washer
- Search Results: lug nuts
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Search Results: lug nut
- Article: Most Popular Wheel Bearings