Right Replacement Hubs for a Trailer with 3500 Pound Axle and 5 on 4-1/2 Bolt Pattern
Question:
Good morning. I have a single axis, 3500 pound, utility trailer and purchased replacement wheels only to find I have 5 on 4-1/2inch hubs but purchased 5 on 5inch wheels. Id like to purchase new hubs from you but want to make sure they will work with the axles I have. Ive printed out your How to Determine Correct Bearings, Races and Grease Seals cut sheet.
asked by: Pete
Helpful Expert Reply:
In order to determine the correct replacement hubs for your trailer I will need to know the inner and outer bearing numbers stamped into the sides of the bearings. If the axle has a grease zerk fitting at the end then it is an EZ lube axle. If there is no grease fitting then it is a regular axle.
Hub # 84545UC1-EZ is for EZ lube axles and it uses inner bearing L68149 and outer bearing L44649.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Search Results: l68149
- Search Results: l44649
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: What is the Outer Diameter of Center of Dexter Trailer Hub Assembly - 3,500-lb Axles - 5 on 4-1/2
- Search Results: spring seats
- Search Results: trailer grease
- Search Results: marine grease
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased Trailer Idler Hub Assembly - 84545UC1-EZ
- Search Results: 008~248~05
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Q&A: Replacement Grease Seal for Trailer Hub with Number P06887
- Q&A: Replacement Grease Seal for P10495TB
- Video: Optronics LED Combination Tail Light Kit Installation
- Video: Peterson LED Light Kit Review
- Video: Review of Peterson Trailer Lights - Tail Lights - V944
- Video: Optronics LED Combination Trailer Tail Lights Installation
- Search Results: dexter 2 132
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Q&A: How to Know if the Hub part # 84545UC1-EZ Will fit an Axle Spindle
- Q&A: Replacement for Dexter 8-283 Hub/Drum
- Q&A: Using Star Shaped # 84545UC1-EZ Hub to Replace Existing Round Shaped Hub
- Q&A: Which Spindle Goes with Dexter Trailer Hub Assembly - 3,500-lb Axles - 5 on 4-1/2 - E-Z Lube
- Shop: Roof Rack