Grease Seal Leaking On 1995 Ranger Boat Trailer
Question:
I put in grease seal 168233TB but still leaks grease would the spindle grease seal kit LM67048 BB60008 fit. I put the buddy bearings on too, seal O D 2.32 Seal I D 1.688
asked by: Lester C
Expert Reply:
If you have installed the # 168233 grease seal and you have Bearing Buddies installed and it still leaks, you may have used too much grease and actually blown out the seal. Often times, we find that is the problem when folks are using Bearing Buddies.
You will need to check the dimensions of your hub and spindle to make sure you have the correct size. You can use a digital caliper like part # PTW80157 and get as accurate as possible measurement.
The inside diameter of the # 168233 that fits the spindle is 1.688 inches and the outside diameter that is the hub bore is 2.332 inches.
The dimensions of the seal with the # BB60008 are 1.875 inside diameter and 2.330 outside diameter, and are designed for 2.328 inch diameter hub bore. Check your inner bearing and if it is a # LM67048 bearing, the # BB60008 kit should work well for you.
I have attached a helpful article that explains how to replace the bearings, races, and seals on a trailer hub.
Products Referenced in This Question
Spindle Grease Seal Set for LM67048 Inner Bearing and 2.328 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.875 Inch I.D.
- 2.33 Inch O.D.
- Bearing Buddy
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.688 Inch I.D.
- 2.332 Inch O.D.
- Redline
more information >
Continue Researching
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Double Lip Grease Seal - 010-180-00
- Shop: Grease Seal
- Search Results: ad2527e grease seal
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Grease Seal - Double Lip - Inner Diameter 1.68" - Outer Diameter: 2.33" - Qty 1
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Q&A: Ranger Trailer Cool Hub Replacement Grease Seal AD2527E
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Q&A: Thickness of Redline Grease Seal # 168233
- Q&A: Replacement Bearings and Seal for 1995 Ranger Trailer
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Boat Trailer Seal for AD2527
- Q&A: Does Grease Seal Thickness Matter More than Inner and Outer Diameter
- Video: Redline Trailer Bearings Races Seals Caps - Seals - 168233 Review
- Search Results: 168233
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: l44649
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Search Results: 10~36
- Article: Trailer Tire Sizing
- Video: Choosing the Right Brake Controller
- Search Results: l68149