Replacement 10 Inch Self Adjusting Trailer Brake Assembly Recommendation
Question:
I have a 25 foot travel trailer with 10 inch electric brakes, tandem dexter axles, 4 brakes. While re packing the bearings, I noticed one of the brakes was completely worn, no lining on the shoe. The other three are ok and working fine, average wear. Can I replace only one brake with a new one? Can I use self adjusting for the one replacement?
asked by: R N
Expert Reply:
Ideally you would replace both sides of the brake assemblies on an axle at a time, but you can just replace the one with a Nev-R-Adjust if you really could only do the one.
For a 10 inch self-adjusting brake assembly for the right hand side of a trailer you would want the part # AKEBRK-35R-SA. For the left hand side you would want the part # AKEBRK-35L-SA.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: How To Determine the Weight Capacity For a Trailer Axle
- Shop: Camco RhinoEXTREME RV Sewer Hoses w Swivel Fittings, 4-in-1 Adapter, and Caps - Black
- Shop: Camco Sidewinder RV Sewer Hose Support System with Storage Handle - 15' Long
- Shop: Karrier ST205/75R14 Radial Trailer Tire with 14" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-3/4 - Pre-Greased
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: How to Measure Brake Drums
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Taskmaster Tires and Wheels - Tire Only - TTWP15175 Review
- Video: Camco RV Sewer - Hoses - CAM39867 Review
- Video: Camco RV Sewer - Hose Support System - CAM43041 Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK1-100 Review
- Video: Kenda Tires and Wheels - Tire with Wheel - AM32153 Review
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: How to Determine if 2,000 lb Electric Trailer Brakes Will Fit
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Recommended Torque Value For Installing Brake Assembly to 3500# Axle
- Shop: Roof Rack
- Article: Overview of Lubricating Grease
- Search Results: 10 inch electric brake assembly