Availability of Replacement Trailer Wiring for Car Hauler
Question:
I need to replace the entire wiring harness for a car hauler trailer that suffered a fire, so I need a harness that supports trailer brakes, side marker lights, etc. and has a 7-pin or 6 pin connector. Do you sell such a harness or know where I can get one? Thanks
asked by: Steve
Expert Reply:
We don't offer a once piece harness, but I can recommend what you'd need to wire your trailer.
I'd recommend using a 7-way connector, like # H20046. Keep in mind that the connector uses a different wire color code than usual. You'll find the color code on the product page I've linked for you. I'd then recommend you terminate the wiring from the connector in a junction box like part # 38656. Using a junction box makes for a neat and weatherproof installation. Use bonded 3 wire, part # 16-3B-1 which is sold by the foot to run you lighting circuits. For the brake circuits, use # 10-1-1 which is also sold by the foot.
You'll also need some ring terminals to make the connections in the junction box. At a minimum, you'd need:
4) for 10-12 gauge wire, part # 44-5310A
4) for 14 gauge, part # DW05702-1
3) for 18 gauge, part # DW05721-1
I've linked you to a video showing how the junction box is installed.
![Mike L](https://images.etrailer.com/static/images/catg/people/166_tn.jpg)
Products Referenced in This Question
Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID
- Wiring
- Wire Connectors
- Ring Terminals
- 3/16 Inch Diameter
- 12-10 Gauge
- Flint Hill Goods
more information >
Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1
- Wiring
- Wire Connectors
- Ring Terminals
- 1/4 Inch Diameter
- 16-14 Gauge
- Deka
more information >
Deka Ring Terminal - 22-18 Gauge - 8-10 Stud Size - PVC Insulated - Red - Qty 1
- Wiring
- Wire Connectors
- Ring Terminals
- Size 8
- Size 10
- 22-18 Gauge
- Deka
more information >
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Lighting Requirements
- Q&A: Bushing and Bolt For Equalizer 13-140-3 Rear Spring Attachment
- Q&A: How to Run an Electric Jack Off of a Trailer Battery and a 7-Way Connector
- Q&A: Replacement P02860 Grease Seal For Lippert Axle On 2019 Keystone Cougar
- Q&A: Where Do You Connect the Blue Brake Controll Wire If The Blue Wire Is Used For ABS on 7-Pin?
- Q&A: Replacing A 125255UC Double Lip Grease Seal
- Q&A: Wire Recommendation for Rewiring Utility Trailer with Brakes