Redline Oil Cap And O-Ring Kit For Trailer With 9 Ton Axles
Question:
Hi I have a 9 ton tag along 3 axle trailer has electric brakes and I need the dexter 21-22 oil caps and o rings. The oil fill hole is in the drum and has a rubber plug that I also need. I would need 6 of everything oil caps o rings oil fill plugs Thank you for your time
asked by: William K
Expert Reply:
If you have 7,000 to 9,000 lb Dexter axles on your tri-axle trailer, the oil cap kit you need for each hub is part # RG04-230.
These are designed to fit 7-9k axles with 8-bolt hubs and includes the oil cap, plug, and O-ring. Just to be sure it will work the threading measurement is 2-7/8 inches outside diameter.
This kit will fit older 6K, 8K, and 9K Dexter axles before 10/1989.
if you do not have 7K to 9K axles on your trailer let me know what size axles you have and I can check to see if we have the oil caps available that will work for you.
Product Page this Question was Asked From
Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles and DeeMaxx 8K Oil Bath Idler Hubs
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 2.875 Inch O.D.
- Redline
more information >
Continue Researching
- Q&A: Replacement Oil Cap for Dexter Hub # 21-35
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Dexter Grease Seal for Seal Part K71-386-00
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Q&A: Troubleshooting Trailer Break Away System
- Q&A: Where do the Wires of a Trailer Break Away System Install Onto
- Q&A: Bearing Kit for Load Rite Boat Trailer with TDE Hub 46845
- Q&A: How To Add A Brake Controller To A 2022 Hyundai Palisade With Tow Package
- Article: Calculating Portable Generator Power Needs
- Article: Trailer Maintenance Schedule
- Article: Trailer Wiring Diagrams
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Measure Your Trailer Wheel Bolt Pattern