Replacement 14 inch Trailer Rim Recommendation that has a 5 on 4-1/2 inch Bolt Pattern

Question

Question:

I am trying to replace my 14 x6 5 on 41/2 trailer wheel that got damaged. I think mine may be 3.19 center bore and your your taskmaster modular steel rim looks identical to mine but it has a 3.27 bore. Will that matter since i have lug nuts instead of bolts?

asked by: Michael H

0

Expert Reply:

The Taskmaster Rim part # TTW460545WS1 that you referenced would work well for you. Since you have lug centric hubs (you have lug nuts, not bolts), having a slightly larger pilot diameter won't matter at all.

expert reply by: Jameson C

0

Answer 1

When it comes to a 205/75R14 trailer tire like the Kenda, #AM10234, this size of tire will fit a 5", 5-1/2", 6", or 6-1/2" rim. I spoke with our in-house tire expert and he said that when it comes to choosing a rim for a trailer…

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 3

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

view full answer...

Answer 4

It is recommend to use the Taskmaster Tire #TTWTRTM2157514D with wheels that are 5-1/2, 6, 6-1/2, or 7 inches wide, such as the Taskmaster Steel Spoke Trailer Wheel #TTW460545WS1. I have attached a link to our trailer tire sizing help article, as…

view full answer...

Answer 5

Some trailer tire manufacturers do not list a speed rating. However, most of these tires are rated for 65 mph. Of the tires we carry, Taskmaster does list a speed rating on most radial tires but not bias ply tires. Radial tires are better for highway…

view full answer...

Answer 6

The load range of the tires you are using will depend on the trailer's capacity. You can use tires with a higher capacity than what the trailer is rated for (though it does not increase the trailer's capacity) but you would not want to go…

view full answer...

Answer 7

It most likely would be wide enough. A 205/75-14 tire can fit on a 5, 5-1/2, 6 or a 6-1/2 inch wide rim. A 215/75-14 tire fits on a 5-1/2, 6, 6-1/2 or a 7 inch rim. It's nearly impossible to determine the correct width of a given rim unless the…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Replacement 14 inch Trailer Rim Recommendation that has a 5 on 4-1/2 inch Bolt Pattern

Product Page this Question was Asked From

Continue Researching