Front Mount Trailer Hitch for a 2015 Jeep Wrangler

Question

Question:

Will it fit the 2015 2 door wrangler

asked by: David

0

Expert Reply:

Curt front mount trailer hitch # 31432 does fit the 2015 Jeep Wrangler (2-door or 4-door) with standard factory bumper and without brake booster pump option. I have linked a video showing an example installation for you.

expert reply by: Michael H

0

Answer 1

The Curt Front Mount Trailer Hitch Receiver item #31433 you referenced is for the 75th Anniversary Edition Jeep Wrangler that came out in 2016 it also fits the hard rock editions. These models have the hard rock bumper which changed the mounting…

view full answer...

Answer 2

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 3

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

We have replacement freeze sensors for the Advent Air AC units with the part #ASA65ZR which it sounds like you are in need of.

view full answer...

Answer 6

After comparing the two front hitches we have available for the 2016 Jeep Wrangler Unlimited, I agree with you and recommend the Draw-Tite Front Mount Trailer Hitch Receiver #65069 over the Curt Front Mount Trailer Hitch Receiver #31432. The…

view full answer...

Answer 7

For your 2015 Jeep Wrangler the front hitch I would recommend is the Draw Tite part #65069 as it has the highest capacities and the lowest price.

view full answer...

Answer 8

Here's what Draw Tite says about the booster pump and the install of their Draw Tite hitch part #65069 on a 2017 Jeep Wrangler Unlimited. 2012 AND UP MODELS MAY REQUIRE TEMPORARILY MOVING THE BRAKE BOOSTER PUMP, REMOVE THE FORWARD MOST BOLT FROM…

view full answer...

Answer 9

Thanks for the picture of the front end of your 2015 Jeep Wrangler Unlimited, based on that we know that the Draw Tite front hitch part #65069 is a confirmed fit and will work well. I attached an install video for this hitch for you to check out as…

view full answer...

Answer 10

The front mount hitch receiver #65069 was designed later and therefore can back fit older models of the Wrangler. So it fits Wranglers from 2007 to 2017. However, since the discontinued hitch #65055 had already been designed it only fits up through…

view full answer...

Answer 11

From my research I found the FHK31432 plow you mentioned requires a front hitch with a 2 inch receiver opening and a minimum tongue capacity of 300 lbs and minimum tow capacity of 3,000 lbs. We have just what you are looking for. The trim package on…

view full answer...

Answer 12

It sounds like you have a Yakima 2-inch hitch-mount 4-bike rack like their DoubleDown 4 that you want to use along with a 2-inch hitch cargo carrier. You can use both a cargo carrier like Curt #C18110 and your Yakima bike rack at the same time by…

view full answer...

Front Mount Trailer Hitch for a 2015 Jeep Wrangler

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching