Center Pilot Hole on 12 Inch Trailer Wheel with 4 on 4 Bolt Pattern is Too Large for Hubs
Question:
Bought some 12inch 4x4 wheels, but the new ones have 2.84inch center holes. My old wheels and the trailer hubs are 2 1/2. The wheels are mounted by bolts, not studs and nuts so I understand I must have wheels with the right size holes. Do you sell wheels with the proper center holes for my trailer? Do you sell adapters?
asked by: Tom K
Expert Reply:
All of the 12 inch wheels with 4 on 4 bolt pattern that we carry have a pilot hole that is 2.8 inches or greater. If the wheel bolts have a 60 degree cone (like # RG02-020 as an example) then the bolts will be able to center the wheel on a hub-centric set up like what you have. The 60 degree cone will center at each hole thus centering the wheel.
If the bolts are flat like a regular nut, or 90 degree, like # RG02-040, then they will not be able to center the wheel properly. We currently do not have a spacer and I wouldn't recommend one anyway because it just adds another component that could potentially cause a problem down the road.
Products Referenced in This Question
Trailer Wheel Bolts - 1/2" Diameter x 1" Long - 60 Degree - Qty 4
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Bolts
- 1/2 Inch Diameter
- Fine Thread
- 1 Inch Long
- Redline
more information >
Wheel Bolts, 1/2" x 7/8", 90 Degree (Qty 4)
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Bolts
- 1/2 Inch Diameter
- Fine Thread
- 7/8 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Karrier ST225/75R15 Radial Trailer Tire with 15" White Wheel - 6 on 5-1/2 - Load Range D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 225/75-15
- 15 Inch
- M - 81 mph
- 6 on 5-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Shop: Trailer Wheel Bolts - 1/2" Diameter x 1" Long - 60 Degree - Qty 4
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Search Results: 4 lug rims
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30790 Review
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30630 Review
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Video: Review of Redline Trailer Wheel Bolts - RG02-020
- Shop: Wheel Bolts, 1/2" x 7/8", 90 Degree (Qty 4)
- Q&A: Do 8 and 12 Inch Wheels Have the Same 4-Bolt Pattern
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30620 Review
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Q&A: How to Determine Needed Pilot Diameter of Steel Dual Trailer Wheel
- Q&A: Trailer Wheel Recommendation for Hub Centric Wheel w 4 on 4 in Bolt Pattern and 2.43 Pilot Diameter
- Q&A: Using Hub Centric Rings on Trailer Wheels
- Q&A: Can a 13 Inch Tire and Wheel Replace a 12 Inch Tire and Wheel
- Q&A: Widest Trailer Tire Size to Fit on 12 inch Trailer Wheel
- Video: Review of etrailer 3 Leaf Double Eye Spring - e84SR
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-1K Review