Will the Draw-Tite # 75684 Fit On a 2011 Kia Sorento with 18 Inch Spare Wheel and Tire
Question:
I have a 2011 Kia Sorento and want your 2 hitch. My question is: will my 18 spare still come down? Is the hitch built so it curves out and around from the spare? I know the exhaust does not need to be lowered, but I was not sure the hitch would clear the 18 spare. Thanks
asked by: Don F
Expert Reply:
As Long as your 18 inch spare wheel and tire are the factory original size spare wheel and tire combination then the Draw-Tite Class III Trailer Hitch, item # 75684, will bolt right up without lowering the exhaust or removing the spare tire. I have included a video of the installation of the 75684 for your review.
If the 18 inch spare wheel and tire are not the factory size wheel and tire combination, the manufacturers of hitches do not test for the larger wheel and tire combination. I can not say for sure that any hitch will fit with the spare tire installed in the original location. The possibility exists that the hitch can be installed and the spare tire will either fit or just have to be pushed back as it is raised into position but I cannot guarantee fit with aftermarket equipment installed.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Comparing Curt # 13195 and Draw-Tite # 75908 for 2017 Kia Sorento
- Q&A: Finding the Serial Number on a Roadmaster Sterling Tow Bar to Use Adapter for Blue Ox base Plates
- Q&A: How To Determine if a 2011 Kia Sorento has the Factory Towing Prep Package
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: How to Tell if 2020 Kia Sorento Has Factory Tow Package
- Q&A: Is Drilling Required to Install Draw-Tite Trailer Hitch on 2012 Hyundai Santa Fe
- Q&A: How to Determine if a 2013 Kia Sorento has a Factory Towing Prep Package
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Hitch Receiver Sizes