Trailer Hitch for a 1994 Pontiac Bonneville SSE
Question:
We offer a hitch that would fit your 1994 Pontiac Bonneville SSE. The Draw-Tite Class II Receiver Hitch, part # 36216 is custom designed for your vehicle. With this hitch, the manufacturer recommends the Class II draw bar, part # 36061. You will need a pin and clip, part # PC2 to secure the draw bar into the receiver, or a locking hitch pin, part # e98879. If you need a trailer ball, we offer the 2 inch ball, part # 19258 or the 1-7/8 inch ball, part # 19256. To wire your Bonneville for towing, you would use the Circuit Protected Modulite with Hardwire Kit, part # 119147KIT.
asked by: Joshua
Expert Reply:
We offer a hitch that would fit your 1994 Pontiac Bonneville SSE. The Draw-Tite Class II Receiver Hitch, part # 36216 is custom designed for your vehicle. With this hitch, the manufacturer recommends the Class II draw bar, part # 36061. You will need a pin and clip, part # PC2 to secure the draw bar into the receiver, or a locking hitch pin, part # e98879. If you need a trailer ball, we offer the 2 inch ball, part # 19258 or the 1-7/8 inch ball, part # 19256.
To wire your Bonneville for towing, you would use the Kit # C59496.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 3 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 1-1/4 Inch Hitch
- Flush Pin
- 2-1/8 Inch Span
- etrailer
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >