Parts Needed for Hub and Drum Assembly for Rebuilt Trailer
Question:
hello, i am rebuilting my trailer. the subject drum and hub assemble i do not need. i do need the inner and outter races and bearings, the inner grease seal,the outter dust and grease seal and the spindle washer. all times six. also 5 lugnuts and 5 lugnut washers. can you help me with some parts numbers? i am also buying backing plate and shoes complete times six. thanks in advance,
asked by: Paul
Expert Reply:
If you have hub and drum assembly # 8-174-5UC3, which you referenced, the assembly comes with the bearing sand seals. However, the replacement parts are:
# 25580 Inner bearing
# 15123 Outer bearing
# RG06-090 seals
# RG04-060 Grease Cap
# 15245 Race
# 916N lug nuts
The lug nuts won't need washers. We do not sell backing plates separately. If you need backing plates and brake shoes, you are better off pricewise to purchase a new brake assembly like # AKEBRK-7R-SA and # AKEBRK-7L-SA.
If you have another hub and drum assembly I will need the part number off the assembly and the manufacturer name.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Race for 15123 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.441 Inch O.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Hex Nut for use with 15-2 Rim Clamp - 9/16"
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- 9/16 Inch Wheel Bolt
- Hex Nut
- Zinc-Plated Steel
- Redline
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Grease Cap, 2.44" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 2.441 Inch O.D.
- TruRyde
more information >
10-10 Grease or Oil Double-Lip Seals - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 5 Spoke Utility
- Dexter
more information >
Continue Researching
- Q&A: Solution for Replacing Dexter 8-222 Trailer Hubs and Bearings
- Q&A: Recommended Axle-Less Suspension For Trailer With 3,500 Lb Wide Axle
- Q&A: Recommended Spindle For # 8-174-5UC3 Trailer Hub And Drum Assembly
- Article: Trailer Jacks
- Q&A: Issue with Bearing Buddy Leaking Grease from Overfill Port
- Q&A: Replacement 12-1/4 Inch x 3-3/8 Inch Braking Assembly with Four Bolt Brake Mounting Flange
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: Recommended Replacement Lights for Truck Lite Stop/Tail/Turn Lights on a Featherlite Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern