Can Trailer Valet Swivel Jack and Trailer Mover Move Jayco Hertiage Dual Wheel Caravan at 90 degree

Question

Question:

Hi. Im think about buying a 2nd hand 2005 Jayco Hertiage 19 foot Dual wheel 14 inch caravan. Ball weight 456 lb 207kgs, GVM 3,732 lb 1,692 kgs and ATM 4,186 lb 1,899 kgs. If i buy it I need to turn it 90 degrees with little room for maneuvering into a tight spot for storage - virtually rotate at 90 degrees almost on the spot not quite. The surface is concrete and virtually flat.

asked by: Dave

0

Expert Reply:

Yes, the handle on the Trailer Valet Swivel Jack and Trailer Mover, part # STC-V211, that you referenced can be turned so the trailer can be steered to make 90 degree turns so you will be able to maneuver your camper into a tight spot.

I have included a video review of the Trailer Valet Swivel Jack and Trailer Mover which shows the trailer mover moving a trailer around tight corners.

expert reply by: Chris O

0

Answer 1

If the incline is slight and the gravel isn't super deep the Trailer Valet XL part #TVXL25 would work. But if you have a steep driveway and/or deep gravel the wheels of the Valet are going to spin. In the video I attached a link to we show the…

view full answer...

Answer 2

When fully retracted, or collapsed the jack is 28.58 inches tall, and 38.42 inches tall when extended as shown in the provided diagram. I've linked you to a product description video featuring the #ORJW1SU ARK Extreme Off-Road Ratcheting Trailer…

view full answer...

Answer 3

You wouldn't want to try and move a trailer up an incline with the MT70881. The dolly itself would be fine but you would most likely not be able to pull that heavy of a trailer up an incline. And then if you somehow did get it going up the…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

I would be happy to! The bottom of the foot to the center of the pipe mount is 10-1/2" when retracted and 24-1/2" when fully extended on the Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option item #TV64FR. Sorry I do not…

view full answer...

Answer 6

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This doesn't come with…

view full answer...

Can Trailer Valet Swivel Jack and Trailer Mover Move Jayco Hertiage Dual Wheel Caravan at 90 degree

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching