Difference Between Tow Ready Trailer Wiring Harnesses For a 2012 Jeep Liberty
Question:
What is the difference between harness 118554 and 118384 for a 2012 Jeep Liberty 4x4? Would be pulling with a 4 plug flat connector. Would either work with the factory connector in the rear, or not? Seems like 118554 is much more work to install. What am I missing?
asked by: Paul
Expert Reply:
The difference between the Tow Ready trailer wiring harnesses, # 118554 and # 118384, is how they connect to the vehicle. If your 2012 Jeep Liberty came with a factory tow package, then you would just need part # 118384. There should be a factory tow package wiring harness behind the rear bumper of your Jeep that is capped off. You will simply remove the cap, plug in this harness and you are good to go.
If your Jeep Liberty did not come with a factory tow package, but the factory plug is still present at the back of the Jeep, then you may have to take the Jeep up to a dealership and have them flash the computer to activate the tow package.
If the plug is not present, then you will have to use part # 118554. This harness will draw power from the Jeep's battery to power the trailer lights and it will use the vehicle's tail light circuits to signal the trailer lights rather than using a factory tow package. I have attached an installation video of this harness on a 2012 Liberty for you to check out.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: Trailer Wiring Harness Installation - 2012 Jeep Liberty
- Q&A: Best Trailer Hitch Receiver and Wiring Harness For a 2012 Jeep Liberty
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Correct Tow Wiring Harness for 2008 Jeep Liberty
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Flat Towing Package for 2008-2009 Jeep Liberty
- Q&A: Differences Between The Brake Buddy Select 3 And Brake Buddy Classic 3 Portable Braking Systems
- Q&A: Comparison of Wiring Harnesses to Fit 2011 Jeep Liberty and Other Parts Needed to Tow a Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Where is the Connection Point For Trailer Wiring Harness # 118384 on a 2011 Jeep Liberty
- Q&A: How Do You Determine If a 2006 Jeep Liberty Has the Tow Package Wiring?
- Article: Best Air Bag Suspension (2023)
- Article: How to Measure for Trailer Hitch Drop
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com