Can Electric Over Hydraulic Trailer Brakes be Installed on a Lippert 7,000 Pound Axle
Question:
Preparing to convert my trailer to disc brakes - will the kits you have fit a 7000 lb axle made by Lippert Components Inc ? Im ordering part numbers K2HR712, 9505 and T4813100. I have a 2014 Duramax with the built in brake controller. Is this compatible with the hydraulic actuator?
asked by: Al S
Expert Reply:
If your Lippert axle uses inner bearing # 25580 and outer bearing # 14125A and 10-36 seals, # RG06-070 then the disc brake kit # K2HR712 will fit your axle. the bearings and seals are sold separately but the races are included and already installed in the hub/rotors.
For a brake line kit I recommend # DM5425 which is for drum or disc brakes whereas # 9505 is designed more for drum brake applications.
If your factory integrated brake controller in your 2014 Chevy/GM truck has an electric over hydraulic mode then it will work with the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit system # T4813102. If it does not have an electric over hydraulic mode then you will likely need adapter # T4845900 for the system to function properly.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Demco Hydraulic Brake Line Kit for Tandem Torsion-Axle Trailers - Drum or Disc Brakes
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 15 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Tandem Axle
- Demco
more information >
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Raw Finish - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Dexter BrakeRite II Electric Over Hydraulic Actuator Kit - Vented - 1,500 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- Disc Brakes
- Dexter
more information >
Dexter BrakeRite SD Adapter for Ford/Chevy Integral Brake Controllers
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Adapters
- Dexter
more information >
Product Page this Question was Asked From
Hydraulic Line Kit - Tandem Axle - Drum
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Hydraulic Drum Brakes
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Breakaway Switch Recommendation to Replace a Bargman Breakaway on a 1976 Nomad Trailer
- Q&A: Parts Needed To Convert Electric Drum Brakes To Hydraulic Disc Brakes On 5th Wheel Trailer
- Q&A: Is There a Latch Repair Kit for an Atwood Trailer Coupler 88555
- Q&A: Replacement Coupler Solution for Atwood Yoke Style Coupler with 15775 Part Number
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043
- Q&A: Replacement Hydraulic Drum Brakes for Dico 15638
- Q&A: Can Titan Model 10 Actuator be Converted to Disk Brakes from Drum
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer