Replacement Strap For Cradles On Thule Bike Racks

Question

Question:

Will 852-3006-001 work for me?

asked by: Denise R

0

Expert Reply:

It looks like you are trying to find a replacement strap for the cradles on a Thule bike rack.

Part # 852-3006-001 is designed to fit several different Thule bike racks and may be just what you are looking for. This strap is designed to fit Thule Apex, Vertex, Gateway, Helium Aero Bicycle Rack Cradles. These are sold individually, so if more than one is needed you can just change adjust the quantity when ordering.

expert reply by: Jeffrey L

0

Answer 1

Yes, the Thule Replacement Rubber Cradle Strap #852-3006-001 is the correct fit for your Gateway 2 carrier, #TH9006XT.

view full answer...

Answer 2

For your Thule Roadway 4 Bike Carrier for 1-1/4" and 2" Hitches TH914XT, which is no longer available, I recommend replacing your current Stay-Put Cradles #853-7887 with the: -Replacement T2 Cradle Body for Thule Bike Carriers #853-5829.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Replacement Strap For Cradles On Thule Bike Racks

Product Page this Question was Asked From

Continue Researching