Length of Inner Part of #84 Spindle
Question:
Hi, can you tell me what the measurements are from the lip where the back bearing goes to the start of the threads where the front bearing goes? Thanks
asked by: Paul
1
Helpful Expert Reply:
Of course! From the threads back to where the rise sits for the grease seal location on the #84 E-Z Lube Spindle # TRU74FR we have about 3-1/8" of spacing. Attached is a review video for you to check out as well as a photo showing this dimension.
expert reply by:
Jon G
1
Distance From Threads to Seal Spot on #84 Spindle
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Search Results: spindle
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Q&A: Flange Bolt Pattern and Distance From Flange To Rear Of #84 E-Z Lube Spindle TRU74FR
- Search Results: 84 spindle
- Q&A: Acceptable Range of Spindle Deflection on Torsion Axle
- Q&A: Replacing Damaged Axles and Spindles on a Yacht Club Trailer
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Search Results: khr10d
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs
- Video: etrailer Trailer Hub and Drum Assembly Installation AKHD-555-35-EZ-K
- Search Results: dexter rotor
- Q&A: Which Trailer Axle Over Under Kit Fits Trailer Axle with 7.5 inch Circumference
- Q&A: How to Determine Which Replacement Wheel Bearings and Grease Seals are Needed for Trailer Hubs
- Q&A: How to Pick Out Bearings for a Tandem Axle Pontoon Boat Trailer
- Video: etrailer Trailer Bearings Races Seals Caps - Bearings - 02475 Review
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-555-35-EZ-K
- Search Results: l44649
- Q&A: Where does a Brake Flange need to be Welded on a Spindle
- Video: Redline Trailer Brakes 4-35 Review
- Video: Review of etrailer by AxleTek Trailer Axles - 2200 LBS Trailer Idler Axle - e43GR
- Search Results: trailer wires
- Article: Trailer Tire Sizing