Recommended Hitch And Wiring Harness For 2015 Honda Accord With LED Lights
Question:
I have a 2015 Honda Accord V6 EX-L and want to install the Curt hitch #11681, Which wiring kit do I need 118586 or C56173? Both seem to be for LED lights but I really cant tell what the difference is. Can you help
asked by: Ken K
Expert Reply:
The Curt Trailer Hitch, part # C11681 will work well for your 2015 Honda Accord. This is a Class l hitch and it has a 1-1/4 inch receiver opening. Per Curt all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps like part # 18050. Failure to properly support these loads will void your hitch warranty from Curt.
You can also order the hitch with a Euro drawbar and hitch ball or a hitch with a standard drawbar.
The recommended drawbar is part # C45521. For a 2 inch ball to work with this drawbar you can order part # 19258, and for a 1-7/8 inch hitch ball, you would need part # 19256.
The trailer wiring harness I recommend for your Accord is the Wiring Harness, part # C56173. You simply connect the harness to the connection points located behind the tail lights and then run a hot lead to the Accord battery.
When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can Any Mechanic Install a Curt Trailer Hitch
- Q&A: Will Curt Trailer Hitch Receiver Fit 2023 Honda CR-V Touring Hybrid
- Q&A: Is Heat Shield Trimming Required to Install the Curt Hitch part # C11681 on a 2015 Honda Accord
- Q&A: Can 12 Volt Power Be Run With a 4 Flat Trailer Plug?
- Article: Hitch Adapters and Extenders
- Article: Trailer Hitch Receiver Sizes
- Q&A: How To See If 2019 Acura RDX Has Plus 12v Power Provision Without Removing Interior Trim Panels
- Q&A: Why Does Curt Require the Stabilization Strap While Carrying a Bike Rack on a 2013 Honda Accord
- Q&A: Recommended Replacement For An Atwood GE16EXT 10 Gallon RV Water Heater
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Best Boat Accessories