bing tracking image
Q & A Icon

How To Wire Dimmer For Vision X Off-Road Lights  

Question:

Im assuming this wires the same as the push button dimmer, but do not find any installation instructions anywhere, even on Vision X site. Can you verify wiring and any idea if this wires in parallel or in place of their toggle switch in the provided wiring harness with the prime drive led lights? VisionX really could have stepped it up a bit in providing information for their products!!! Thank You

0

Expert Reply:

I called my contact at Vision X about the Dimmer for Vision X Off-Road Lights with Prime Drive, part # XIL-PDIMMER.

They told me that the red wire is used for the 12V power source and the black wire is the ground. You will want to make sure you attach the ground to a clean bare metal surface.

The small yellow harness with a green wire will plug into the yellow connector on the dimmer and the other end will connect to the green, yellow, or dimmer wire coming from your Vision X product.

I have attached a link to the Vision X lights we offer you can check out.

expert reply by:
0
Jeffrey L
click to enlarge

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>