Cushioned Pin Box Compatible with Leland 7920 Pin Box For 10K Trailer

Question

Question:

My fifth wheel has a Leland AF-7920 10,000 GVWR king pin box. I am wanting a sidewinder hitch is the ST400-5AS16K one I would need?

asked by: Michael A

0

Expert Reply:

For your Leland 7920 pin box for your 10,000 lb trailer, the correct cushioned pin box is the MORryde Cushioned 5th Wheel Pin Box for Up to 11.5K Trailers # MR85VR.

expert reply by: Mike L

0

Answer 1

If your trailer has a GVWR of 11,501lbs - 14,000lbs then I recommend the MORryde Cushioned 5th Wheel Pin Box Item #MR25VR. If your trailer has a GVWR of 14,001lbs - 18,000lbs then I recommend the MORryde Cushioned 5th Wheel Pin Box Item #MR52VR.…

view full answer...

Answer 2

It sounds like you might be looking for the Replacement #20 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems #MR79UR, which is the replacement shear spring for an RS or LRE suspension. If you can specify which part you're…

view full answer...

Answer 3

The Mopar M20 hitch is basically a rebranded Curt Q20 hitch which you could replace the legs of to get a slider hitch with the roller part #C16550 and the Ram rail kit adapter #C16022 and you'd be set to tow with your 2020 Ram 2500 with factory…

view full answer...

Answer 4

Yes, you can use an adapter to get your Curt e16 5th Wheel Hitch item #C16115 to work in your 2020 Ram 2500's factory puck system. You will want the Adapter Rails for Curt 5th Wheel Hitch item #C29BR. This adapter will attach to your Ram's…

view full answer...

Answer 5

The Leland 7921 pin box should be the same dimensions as the MORryde Cushioned 5th Wheel Pin Box for Up to 11.5K Trailers w/ Dexter 221002300 or Leland 7920/7921 #MR85VR. With such a specific fit as this one MORryde would've made it very similar…

view full answer...

Answer 6

You definitely could use a slider fifth wheel hitch like the part #RP30051 in a long bed truck and just leave it in the forward tow position all the time. The only down side to this is that slider hitches have more moving parts so they tend to be…

view full answer...

Answer 7

The Curt CrossWing #C86JR has a 20.5" x 22" center on center mounting pattern. If the adapter you have doesn't fit these dimensions then you can use the adapter #C29BR in order to mount the hitch in your 2020 Ram 3500's puck…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Cushioned Pin Box Compatible with Leland 7920 Pin Box For 10K Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching