29 inch Spare Tire Cover Recommendation for Antique Car

Question

Question:

I am looking for a tire and wheel cover for my antique car. the size is 4.75 500X19. I measured the diameter and it looks to be 29inch Will this one fit or do you have one that will.. needs to be black.. thank you

asked by: Jim C

0

Expert Reply:

The spare tire cover part # CE27440 that you referenced is designed to fit 29 inch diameter tires, so if the one you have on your car has a 29 inch diameter tire this would work perfectly. Not to mention it's also black.

expert reply by: Jameson C

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 4

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

Based on the information I could find for the DICO 45264 is was popular on ShoreLand'r trailers. This would require the Idler Hub #AKIHUB-545-35-G-EZ-K with the Grease Seal #168255TB used instead of the seal included with the hub. We currently do…

view full answer...

Answer 7

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...

Answer 8

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 9

Great question, Mike! The Brophy Rigid Mount Spare Tire Mount #BR56VR doesn't actually have a weight rating because it's been rated for tires that fit on up to 17-1/2" wheels. So this will be able to handle the weight of your 16"…

view full answer...

29 inch Spare Tire Cover Recommendation for Antique Car

Product Page this Question was Asked From

Continue Researching