Charging Batteries on Swift Hitch Wireless Camera System Using Shore Power

Question

Question:

can the unit be charged on the trailer when we are on full hock ups ?

asked by: Doug

0

Expert Reply:

As long as the charger for the Swift Hitch # SH02DIGITAL is being provided 12V-DC, it will charge. If you're using shore power (hook-ups), an AC to DC adapter is available as part # PP01, which will allow you to use 110-120V AC to charge the batteries in the camera and monitor.

If you click the provided links, you can see a product description and product demonstration video.

expert reply by: Mike L

0

Answer 1

For a substantial 32-foot trailer like yours I suggest the 2-camera system #SH03D from Swift Hitch. This wireless camera system allows you to switch between the two cameras' different views, it includes night vision which is great for those…

view full answer...

Answer 2

I attached a picture that shows what the display of the Swift Hitch Digital Wireless Hitch Alignment Camera and Monitor #SH02DIGITAL looks like, but while I think the display is very clear and would work great you won't be able to beat the…

view full answer...

Answer 3

Yes, the Swift Hitch Wireless Camera System, #SH02DIGITAL, can be used at the rear of your RV as you have described. We had a chance to test this camera out at a product demonstration and it works great. The field of view is a 55 degree angle…

view full answer...

Answer 4

The Replacement Battery for Swift Hitch SH01 Camera - 4-Hour Battery Life #PB02 is the correct fit and yes it does require soldering the contacts for installation. I've attached a customer photo to assist.

view full answer...

Answer 5

There isn't a larger monitor specifically for backup camera #SH02Digital but you can run the video feed out to a different monitor if you wanted to. I have included a link to a video review of this backup camera system for you.

view full answer...

Answer 6

The storage case #PC02 is available separately for Swift Hitch camera systems such as #SH03D. It is not included with the camera system. But it does come with similar system #SH02DIGITAL. The difference between this one and #SH03 is that the SH03D…

view full answer...

Answer 7

For a dual camera system with your Keystone travel trailer I recommend using the Swift Hitch Digital Wireless #SH03D, which has a pair of portable cameras that can be placed anywhere you like for backing up and monitoring traffic. They come with…

view full answer...

Answer 8

It sounds like you want to use multiple cameras. For that I recommend the Swift Hitch 2-camera system, #SH03D, which will allow you to view the images from two different cameras (included) with the one monitor that comes with the system.

view full answer...

Answer 9

The Swift Hitch Wireless System #SH03D would work great for you. It includes two cameras that wireless communicate with a handheld monitor. You can mount once camera in your truck bed and the other on the back of your trailer and toggle between each…

view full answer...

Answer 10

I spoke with my contact over at Swift Hitch and he said that the AC to DC adapter #PP01 is compatible with all Swift Hitch camera models. So as long as you have a Swift Hitch camera system this adapter will work!

view full answer...

Answer 11

Yes you can use the AC to DC Adapter for Swift Hitch Wireless Camera System part #PP01 to get your 115 AC power down to the 12V power that you require for your Furrion monitor to work. As an alternative and more permanent type of fix for this you can…

view full answer...

Answer 12

The extension antenna that is included with the Swift Hitch Digital Wireless Hitch Aligner System part #SH03D will more than likely help to improve the signal while traveling. However, you cannot add a camera from this system to your Swift Hitch…

view full answer...

Charging Batteries on Swift Hitch Wireless Camera System Using Shore Power

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching