Replacement Threaded Hitch Pin for a Rhode Gear Hitch Mounted Bike Rack

Question

Question:

I have an old Rhode Gear Highway 2 bike rack hitch-based. Recently, Ive purchased from you the Swagman bar for ladies bikes. Ive noticed they also offer locking hitch pin. Id like to buy it, but I am not sure which one will fit my rack. The hitch pin I have has a thread for part of the length. Could you please advise me? Thanks!

asked by: Jerzy S

0

Expert Reply:

I spoke with my contact at Yakima, the parent company for Rhode Gear and found that there is not a separate threaded hitch pin available but there is a Hardware Bag, # RG890247, available for the Older Generation Rhode Gear Highway Bike racks.

expert reply by: Jameson C

0

Answer 1

Your picture didn't make it through, but Rhode Gear has been discontinued for such a long time that we don't have any replacement parts for their racks. Sounds like you need a shank for the rack which I know we won't be able…

view full answer...

Answer 2

Happy Thanksgiving to you as well! We do have a few replacement parts available for certain model Rhode Gear Bike Racks. For a replacement stabilizing strap that will fit the Rhode Gear Super Shuttle 2 Bike Rack, you can use #Y8890253. The…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Replacement Threaded Hitch Pin for a Rhode Gear Hitch Mounted Bike Rack

Product Page this Question was Asked From

Continue Researching