Trailer Hitch and Wiring Recommendation for a 2015 Ford Explorer
Question:
I have a 2015 Explorer XLT and am looking for a class 3 hitch that will look just like a factory hitch. It did not come with the tow package.
asked by: Mark P
Helpful Expert Reply:
All of the trailer hitches for your 2015 Ford Explorer will have the receiver just below the rear fascia. None of them will have the receiver higher like the OEM hitch.
If you decide to go with an aftermarket hitch the most popular option is Curt hitch # C13386. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
To add trailer wiring, if your Explorer does not have the factory tow package use # C59496. If it does have the factory tow package but no trailer connector, use # 118540
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Where Does Wiring Harness Plug Into on 2018 Ford Explorer
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Is an Oil Cooler Required for Towing with a 2016 Ford Explorer
- Q&A: How to Determine if Engine Oil Filter Will Fit 2017 Ford Explorer With 3.5L V6
- Q&A: Engine Oil and Transmission Fluid Cooler for a 2017 Ford Explorer
- Q&A: Trailer Wiring and Brake Controller Recommendations for a 2017 Ford Explorer Without OEM Tow Package
- Q&A: Recommended Trailer Wiring Harness for a 2018 Ford Explorer Without Trailer Hitch
- Article: Performance Chips and Modules
- Article: Best Air Bag Suspension (2023)
- Article: Best Bike Racks for Electric Bikes
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure for Trailer Hitch Drop