How to Determine the Correct Replacement Lid/Cover for a Roof Vent on a 2003 Haulmark Grizzly

Question

Question:

need a top vent cover for 2003 haulmark grizzly cargo trailer

asked by: Charles N

0

Expert Reply:

To find the correct replacement lid, if available, for your vent you will need to look at the dimensions of the vent and the hinge style. There are 3- and 4-point hinges and continuous hinges. For example, cover # BV0554-01 fits vent assemblies that are 14-1/4 inches square with a continuous hinge. We have pictures of the hinge styles on the product pages for each replacement cover. I have linked all of the replacements we carry for you to look through and compare to your vent.

expert reply by: Michael H

0

Answer 1

You will first want to measure your vent, not the actual cover on your trailer. The vents are 14-1/2 by 14-1/2 inches, 14 by 14 inches, or 13 by 14 inches, in size. Then you will want to make sure the correct size cover uses the same type of hinge as…

view full answer...

Answer 2

Many of the trailer roof vents use a standard 14-1/4 x 14-1/4 inch rough opening. The vent cover you choose will depend on the hinge style. I have attached three photos of roof vent covers that shows the hinge styles. Check out the vent on your…

view full answer...

Answer 3

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 4

You should just be able to replace the broken lid. In order to choose the correct replacement, knowing the manufacturer and model number of the vent would be helpful. Barring that, you can match up the vent by size, by measuring length and width of…

view full answer...

Answer 5

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

How to Determine the Correct Replacement Lid/Cover for a Roof Vent on a 2003 Haulmark Grizzly

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching