Is Bolt Leader Wire Included in Installation Kit for Curt Class I Trailer Hitch Receiver # C11282
Question:
I will be buying the tow kit and wiring for 2014 Cruze. I think the installation video is a great help! My number one concern is...Will I get one of those wire things to get the bolts through the frame channel? Losing a bolt in there would have to be real pain. That is my only concern, cant wait to get it and get it on the car. Thanks,
asked by: Terry C
Helpful Expert Reply:
I might be a little biased but I think that our install videos are awesome. Written instructions get the job done but seeing someone complete the installation on video takes all of the guess work out of it for me. I'm glad to hear that you also feel that they are a great help.
As for the bolt leader wire, yes it is included with the Curt Class I Trailer Hitch Receiver, # C11282, for your 2014 Chevrolet Cruze. This is a custom fit hitch and offers bolt-on installation with no drilling or welding required.
For wiring, Curt offers the T-Connector Harness with 4-Pole Flat Trailer Connector, # C56214. The wiring harness connects quickly and easily by plugging directly into existing wiring.
To complete your towing setup you may still need the following:
Ball Mount # C45522
Hitch Ball # C40001 for 1-7/8" and # C40018 for 2"
Hitch Pin and Clip # F-4
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Is There Custom Towed Vehicle Wiring Available For A 2011 Chevy Cruze LS
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Utility Trailer, Trailer Hitch Receiver, and Wiring Harness For Towing With 2014 Buick Verano 2.4L
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Replacement for Dometic Duo-Therm RV Air Conditioner
- Q&A: What Will the Curt Hitch # C11282 Look Like Installed on a 2015 Buick Verano
- Q&A: How to Pick Either the Left or Right Hand Side Lippert Screen Door Latch
- Q&A: Mounting Hole Dimensions for the Curt Trailer Hitch Receiver # 14053
- Article: How to Choose a Hitch-Mounted Bike Rack