Will Curt Fifth Wheel Legs for Dodge OEM Prep Pkg Clear Bed Mounted Fuel Tank
Question:
My question deals with Curt 16021 Leg Kit. I have a large fuel tank in the bed of my Ram. Question is: when the locking arms on the front 2 legs are in the open position and ready to it in the holes in the bed, what is the total distance from the center of these holes to the top or end of these locking arms? I have only 7 inches from the center of the hole in the bed to the rear wall of the fuel tank.
asked by: Al H
Helpful Expert Reply:
I think the legs will fit just fine. To fully open the locking arms, they're turned 90 degrees from their locked position, which does NOT have them pointing directly to the front which would place them close to the fuel tank.
Since the locking arms measure about 7-1/4 inches from the center of the bolt to the end, and they wont extend fully forward, I'm confident that the location of your fuel tank won't interfere with the locking arms. You will be able to install and remove the legs with no problem whatsoever.
I've edited a photo for you, where I've attempted to show this.
Product Page this Question was Asked From
Curt OEM 5th Wheel Hitch Legs for Ram Towing Prep Package - 25,000 lbs
- Accessories and Parts
- Fifth Wheel Hitch
- Legs
- 25000 lbs GTW
- A16
- A25
- E16
- Q20
- Q24
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: c16021
- Search Results: reese wedge
- Shop: Sidewinder Wedge for Curt A Series 5th Wheel Trailer Hitches
- Shop: Replacement Wedge Block for Lippert Turning Point Pin Box
- Shop: Curt OEM 5th Wheel Hitch Legs for Ram Towing Prep Package - 25,000 lbs
- Shop: Sidewinder Wedge for Curt A Series 5th Wheel Trailer Hitches
- Shop: Curt A16 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
- Shop: Fifth Wheel Hitch
- Search Results: 16992
- Video: Curt A16 Fifth Wheel Trailer Hitch Sidewinder Wedge Kit Review
- Q&A: Can I Use A Curt A20 With A Reese Sidewinder On A Ram Truck With The Rambox
- Video: Review of Reese Fifth Wheel King Pin - Upgraded Pin Box - RP34FR
- Shop: Trailer Hitch
- Shop: Reese Sidewinder 5th Wheel King Pin with Rotating Turret - 20,000 lbs
- Shop: Trailer Wiring
- Shop: Reese Sidewinder 5th Wheel King Pin with Rotating Turret - Lippert 1716 and 0115 - 20,000 lbs
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Shop: Suspension Enhancement
- Shop: Base Plate for Tow Bar
- Article: Ram Trailer Tow Prep Package
- Q&A: How to Raise a 5th Wheel Trailer so it Rides Level
- Q&A: Parts Needed To Install 7-Way & Trailer Brake Controller On 2024 Grand Highlander With Factory 4-Way
- Q&A: Best Brake Controller For 2024 Toyota Grand Highlander
- Q&A: 2019 Ram 2500 OEM Puck System Adapter for RBW Lil' Rocker 5th Wheel Hitch
- Q&A: Is the Puck System for Ram the Same as GM
- Q&A: Troubleshooting A Furrion Tankless Water Heater That Keeps Blowing Fuses
- Article: Trailer Lighting Requirements
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters
Rick L.
1/20/2020
What is the weight of the hitch legs c16021. And will my curt a20 hitch fit the c16021. Also, what would the installed height range if using these legs with my A20 hitch