Will Curt T-Connector with 4-Pole Flat Trailer Connector Work with 2007 Nissan Sentra
Question:
Could 56022 work with a 07 nissan sentra?
asked by: Hector
Expert Reply:
The Curt T-Connector Wiring Harness, # 56022, is confirmed to fit your 2007 Nissan Sentra. This wiring harness quickly and easily installs a 4-way trailer connector on your Sentra. The T-connector plugs directly into existing wiring and the powered converter reduces strain on the wiring system and is made using SMT to ensure superior performance.
For the brake lights and turn signal circuit the Curt T-Connector can handle 3 amps per circuit and for the tail lights it can handle 6 amps per circuit. The high amp rating means the T-Connector harness is unlikely to short out due to excessive amperage draw from the trailer's lights.
One of the most difficult parts of the installation is routing the power wire. I have attached a help article that gives tips on how to route the power wire from the wiring harness to the vehicle's battery for you to check out.
![Chris O](https://images.etrailer.com/static/images/catg/people/632_tn.jpg)
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Can a 1-7/8 inch Hitch Ball be Used with a 2 inch Coupler on Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight
- Article: What Do I Need To Tow A Trailer?
- Q&A: What to do with Blue Wire with Install Harness # ETBC7 with Curt Echo Mobile C51180
- Q&A: Wiring a 2021 Subaru Outback to Use a Wireless Brake Controller
- Q&A: Difference in Class I and Class II Ball Mounts and Can They Interchange
- Q&A: Can I Remove A Weld-On Trailer Coupler and Replace it With A Bolt-On Coupler?
- Q&A: Can Weld-On A-Frame Trailer Coupler be Replaced with a Bolt-On Coupler