Replacement Hinge For Surco RV Ladder

Question

Question:

RE: part # SPN-8924. Hinge for Surco ladder. Whatt is this made of?

asked by: Al W

0

Expert Reply:

I spoke with my contact at Surco and they told me they make only one hinge for their ladders.

We do carry the replacement hinge for the Surco ladders. It is part # SPN-422. These are made of aluminum and fit 1 inch tubing. There is a quantity of 2 in the package.

I was unable to find a reference to the number you asked about.

expert reply by: Jeffrey L

0

Answer 1

The diameter of the Replacement Aluminum Hinges #SPN-422 measures 0.85" and they are about 1" long. I have attached a photo for you to reference.

view full answer...

Answer 2

The longest exterior ladder that we currently have to offer is the Stromberg Carlson RV Exterior Ladder w/ Hinges #LA-401. This ladder is 99-1/2 inch tall, 12 inches wide, and has 7 steps. We also carry this ladder in Black with part #LA-401BA.

view full answer...

Answer 3

We have the Surco Universal Exterior RV Ladder, #SP501L along with the Surco RV Ladder Extension, #SP504L. The the Surco, #SP501L allows for customization of length and to fit with contours. Please note the attached images. Even if you do not require…

view full answer...

Answer 4

If you cut the replacement ladder support part #8531-B down to 5-1/2 inches you do not need a new expansion nut. You can remove the plastic cap from the peg, push the star shaped nut down (pictured in the photo) and cut the peg. Then replace the…

view full answer...

Answer 5

The MORryde Manual Storage Reel #MR47RR has a lot of parts that are involved in the handle assembly. I have added a picture to help see the order. First onto the machined drum piece you will slide 2 white plastic washers. Then there are 3 wave…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

The Kenda Karrier ST205/75R14 Radial Trailer Tire #AM10235 (Load Range D) and the Kenda Karrier ST215/75R14 #AM10229 (Load Range C) that you referenced are simply different tire sizes. The ST215/75R14 tire size is larger in diameter/height by just…

view full answer...

Answer 9

For your 14 inch wheels, I recommend the Provider ST215/75R14 Radial Trailer Tire - Load Range D #TTWTRTM2157514D. This is a slightly smaller tire, but it is very well made. It is rated for 2,200 lbs at 65 psi and has a max speed rating of 81 mph. It…

view full answer...

Answer 10

I think you might be talking about diameter but yes, a 215/75-14 trailer tire will have a slightly larger circumference than a 205/75-14 tire. Specifically, the 205 will have a circumference of about 82.582 inches whereas the 2015 will have a…

view full answer...

Answer 11

The difference in the Kenda Loadstar ST215/75D14 Bias Trailer Tire part #AM1ST90 and the Kenda Karrier ST205/75R15 Radial Trailer Tire part #AM10245 are that the D is a biased ply tire and the R is a radial tire. The biased is a better tire for off…

view full answer...

Answer 12

Dexter hub #8-174-5UC3 uses the 5-spoke utility bolt pattern so it is uncommon just like the hub you have. If your existing hub uses inner bearing 25580 and outer bearing 15123 with a seal inner diameter of 2-1/8 inches then this hub is a likely fit.…

view full answer...

Replacement Hinge For Surco RV Ladder

Product Page this Question was Asked From

Continue Researching