Landing Pad 11 for Yakima SkyLine and Control Towers - Qty 2
(283 reviews)
Price: $143.90
In Stock
Landing Pad 11 for Yakima SkyLine and Control Towers - Qty 2
Item # Y00233
Our Price: $143.90
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (283)
- Q & A (0)
- Videos (14)
- Photos
Yakima Roof Rack - Y00233
- Fit Kits
- 2 Pack
- Yakima
Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with fixed factory install points. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.
Features:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with fixed factory install points
- Attach to factory fixed points with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Specs:
- Quantity: 2 pads
- Lifetime warranty
8000233 Landing Pad 11 for Yakima Control Towers
Installation Details
Video of Landing Pad 11 for Yakima SkyLine and Control Towers - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Review - 2017 Kia Soul Y00148
Today on our 2017 Kia Soul, we're going to be test fitting the Yakima Skyline Roof Rack System consisting of part numbers Y00408. These are the round 48" CrossBars. Part number Y00148, these are the SkyLine Towers. Part number Y03536, and this is the RoundBar SL Adapter for the Yakima Skyline Towers. Part number Y00233, and these are the Landing Pads for the Yakima Control Towers. The Yakima Skyline Roof Rack is great for carrying accessories on your roof and potentially freeing up space in your vehicle.
It can carry bike racks, cargo baskets, and closed cargo boxes, watersport carriers such as kayaks and canoes, ski and snowboard carriers. Always double check with your vehicle's manual to make sure that your roof can withstand the weight of the things you're putting on there. Combined, the two crossbars here have a carrying capacity of 220 pounds. All four towers have these plastic knock outs in the center here which you can replace with locks that are sold separately. It also has a nice feature that when you're done using the bars, you can simply just lift them off and each of the landing pads has these plastic caps that you can put in place so you don't have to remove them. Now that we've gone over some of the features of the roof rack, let's go ahead and show you how it installs. We have our rear roof rack assembly here.
We have our landing pads, our skyline towers, and then our adapter kit for the roundbars. Let's go ahead and start by assembling our adapter kit for our roundbars and get those set up. I'll take our tower here, we'll place our adapter piece in the center, and then press it into place like so. We'll do this for the other one, as well. Now we'll take our adapter for the actual bar, set that in the center, and then we'll turn it upside down, find our screw at the bottom here, then tighten it down until you hear the clicks.
Now, repeat this for the other tower. Now, we'll go ahead and slide our tower onto our bar like so. We'll do the same for the other side. Then we'll go ahead and put our end caps in place, and so they don't come back out. Next, we'll 00:02:20 focus on our actual landing pads. Go ahead and take our top cover piece off like so, and then we'll attach our actual rubber pad at the bottom.
This just presses into place. We'll repeat this for our other landing pad. Now, we'll move on to the roof of the vehicle and our rear fix point's going to be right here. We'll have to remove this plastic piece on the top. You notice at the top of the plastic piece here it has a little arrow facing forward, so you go to this point here with the flat plated screwdriver. Just push forward and it'll lift right out. The bolt you're looking for is on the inside here where we're going to make our connection point with this bolt that comes with the kit. Now, this landing pad kit does come with several bolts. Please refer to your instructions to find out which one goes with your particular vehicle. Now, go ahead and set our landing pad over where we're going to be installing our bolt. Then we'll install our black plastic washer, and then our bolt, and three metal washers. We'll take our included Allen tool, match it up with our mounting point, and tighten it down. Now, we'll repeat this for the other side. Now, we can set our crossbar into place. Now, we want to make sure that the front here is in the open position. This is so they can rest into our landing pads. We'll set them in the cradles, and then we'll determine the crossbar overhang with our crossbars, and then tighten those down as well. I'm going to go back and forth here a little bit, and then measure it out to make sure that it's even on both sides. That looks good. Then we'll tighten our bars to our towers, and to do that we'll tighten this bolt in the center here with our included torque tool until it clicks. We'll do this on the other side. All right. Our final step is to close up our towers which will lock them into place to our landing pads. Just push them in like so, and now we're ready to hit the road. There you have it for the Yakima Skyline Roof Rack System on our 2017 Kia Soul.
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Landing Pad 11 for Yakima SkyLine and Control Towers - Qty 2 - Y00233
Average Customer Rating: 4.8 out of 5 stars (283 Customer Reviews)
Custom-fit Landing Pads allow you to attach SkyLine and Control Towers to vehicles with fixed factory install points. Mount to existing tracks and combine with SkyLine and Control Towers to create a base for an aftermarket roof-rack system.by: Jeremy06/05/2018
2015 Mazda 6
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.
by: David 04/26/2024
Parts arrived as advertised for the model
Car so happy to find the right fit
But super pricy for some plastic.
by: Dan B.05/01/2016
At first, a little tricky to install, as the kit comes with hardware for a variety of applications (different length/size bolts, etc). But after a quick look at the directions and identifying which bolt to use for my car, install was a breeze. I love this Yakima setup because I can remove the bars/towers and leave the landing pads with a cap. Makes it great for taking the canoe out on weekend trips, but not taking the fuel-economy hit during the weekday commute to work.
by: Axl01/02/2017
2016 Subaru Forester
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door.
Axl
1/3/2018
No questions or comments. They are on my wifes Forester and she lovesthem.
by: David05/09/2018
Ford Flex
We purchased the Yakima Skyline Towers roof rack with the Jet Stream crossbars. Took about 2 hours to install on the naked roof of our Flex. I drilled through the roof strip for the mounting bolts and they fit tighter than the factory rails. Very happy with our choice.
by: Jake01/17/2019
No complaints! Fits seamlessly with the towers and super easy to remove and replace the bars!
Jacob K.
1/20/2020
Still working great! The Landing Pads havent budged, and weve since added a Rocketbock, which probably puts more stress on the landing pads, but still no movement.
by: Luke07/20/2012
2008 Mazda 3
I got my new landing pads the day they said it would arrive. The pads were in their original yakima packaging, properly packed and overboxed. I work for a logistics company so I know the importance of getting product to a customer on time and exceeding their expectations. Very well done etrailer.com! The landing pads is just part of what I needed, and with the discount code included for my next purchase, I will be back. Thanks again.
by: Robert P.12/23/2010
BMW
Yakima Roof Rack for BMWI ordered a yakima roof rack for my BMW during the mad rush of Christmas shopping and have received everything need for the assembly in a very short amount of time. I have even received follow up emails telling me the status of the shipping as well as a courtesy email. I also found that etrailer.com is also much cheaper than other retail stores such as REI. I highly recommend using etrailer.com!
by: SJHughes12/23/2017
Simple installation to vehicle with supplied hardware and tools. Once these bases are installed to the vehicle, it is simple for a single person to install and remove crossbars and towers in just a couple of minutes.
by: Roy05/02/2016
2015 Nissan NV200
Fit my nissan nv200 no problem. Comes with different size and length bolts to fit multible vehicles. Directions did tell me to use different size bolts thay clearly were the wrong ones but it was easy to figure it out. Also: u need all 3 products to complete ur roof rack system.
by: James H.12/13/2010
Pontiac Trans Sport Van
A rack for Porsches for lessFor those Porsche owners put off by the price of the Porsche Roof Transport System, try Yakima. For significantly less, you get a solid rack which uses your Porsche mounting points and since it is a component system, it fits both Caymans and Carreras.
by: Don Oakley11/12/2013
My roof rack arrived as promised and in good condition. Your web site was very useful in instructing the installation and how the parts matched with my other accessories. I did have a struggle lining up the screw holes, but with patience I succeeded.
by: Kyle 10/13/2011
2008 Subaru Impreza
Just installed to my 08' Subaru Impreza using the factory bolting mounts. Easy setup did in about an hour or so including my Yakima High Roller bike rack. Seems sturdy, hopefully so to carry my heavy downhill mountain bike!
by: Tasha K05/23/2020
We bought this at the same time as a roof rack for our first family camping trip. These were really easy to install and have held up excellently in the last year.
by: tom s03/25/2011
looks good on car. easy install. easy on - off. looks strong. BUT incredibly noisy. I will have to buy the wind gaurd. They might as well include it because its no good without. now i will have to pay for shipping for the gaurd. I will remove it when not in use. Next life I'll try "the other guy"
by: Dave P.08/17/2016
2014 Toyota Tacoma
Landing pads arrived in the promised time frame. Box was in good condition and product worked great
by: Steve04/08/2021
The product performs as advertised making rack install & removal quick & easy. I would prefer a two screw attachment to the roof yet that seems dictated by the vehicle.
by: Tony C05/01/2012
Porsche Cayman
Product was shipped very quickly with great communication along the way! This is a much more affordable option for the Porsche Cayman than the expensive factory bike rack.
by: Sean06/28/2020
The rep from etrailer (Noah conformed my online order, made certain my order was correct for the vehicle I was outfitting and made certain I received my order items on time before my trip. This company is great!
by: Angelique06/16/2020
I needed a replacement for this part. Works great. Fast delivery.
by: xx09/12/2016
It was shipped quickly and was easy to install.
Xx
10/23/2017
still good, thanks!
by: Steven07/17/2020
Parts were shipped the same day as I ordered them and arrived 3 days later -- 2 days sooner than the estimate. Everything fit as advertised. I couldn't be more satisfied.
by: Lee04/25/2018
2018 Toyota Tacoma
The product I wanted shipped quickly and at a good price. Great service and quality.
by: Joe W04/22/2011
Order arrived on time in good shape, and it was a good price
I have not had a chance to install it, but it seems pretty straightforward.
by: Wade M. 07/09/2016
Excellent product and A++++++++ Customer Service!!!
25
283
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Recommended Roof Rack for Bikes On a 2017 Subaru ImprezaIn order to carry bikes on the roof of a 2017 Subaru Impreza you'll need a roof rack, the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00248 for hatchback or part # Y00233 for sedan models is what I recommend. Then for a bike rack, the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 is a great option that wont require you to remove the wheel.
view full answer... - Roof Rack Kit for a 2014 BMW 3 SeriesI have a solution for you, but I checked the availability with Yakima of both of the fit kits you mentioned, and they are no longer available. The conflicting information is a result of Whispbar being discontinued and with Yakima, who took over WhispBar, worked to cross link viable kits together. Many of the Whispbar parts are linked through the site still, but are unavailable. Instead, a comparable in price kit is the Yakima JetStream kit, consisting of: Yakima JetStream Crossbars,...
view full answer... - Roof Rack Recommendation to Fit Factory Fixed Mounting Points of 2016 Mazda 3 SedanFor your 2016 Mazda 3 Sedan with factory fixed mounting points we have a fit but it is not the Rola you referenced. Instead you would need the Yakima kit part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which is a confirmed fit.
view full answer... - 2016 Mazda CX5 Yakima Roof Rack RecommendationFor your 2016 Mazda CX-5 with a naked roof you would need the following Yakima components to complete a roof rack: Round 48" CrossBars # Y00408 (you most likely already have these) SkyLine Towers # Y53TR RoundBar SL Adapter # Y03536 LandingPad 11 for Yakima Control Towers # Y00233
view full answer... - Correct Yakima Landing Pad to Fit 2020 Subaru ImprezaThe Landing Pad 11 # Y00233 will fit your 2020 Subaru Impreza as long as it's a Sedan (4-door) with no existing rails or crossbars on the roof. Please note that you will need 2 sets of the Landing Pad 11 to complete your roof rack. I really like the JetStream crossbars so for a complete roof rack you will need the following: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 SkyLine Towers - # Y53TR Landing Pad 11 - # Y00233 Key System - # Y07204 (optional) If you happen to...
view full answer... - Cargo Box Recommendation for a 2014 Subaru Forester with Fixed PointsFor a Yakima roof rack confirmed to fit the fixed points of your 2014 Subaru Forester you would need the SkyLine Towers and RoundBar SL Adapter parts # Y53TR and # Y03536, 2 sets of the LandingPad 11 # Y00233, and a set of 2 48 inch crossbars # Y00408. The Yakima MegaWarrior # Y07080 has been confirmed to fit this rack as well. I checked with Yakima and all of their cargo boxes we carry are confirmed to fit this rack. I attached a link to al of them to the right.
view full answer... - Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point RoofThe difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
view full answer... - Roof Rack Recommendation for 2016 Subaru WRX STiWe do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
view full answer... - Longest Roof Rack Bars That Fit a 2015 Subaru Impreza HatchbackSince you are wanting to use crossbars that may be longer than what is recommended from the manufacturer I would go with a Yakima system. Their JetStream Crossbars have a track system on the bottom that allow them to be more versatile than many other roof racks from competitors. If your 2015 Subaru Impreza Hatchback has a naked roof then you need the SkyLine Towers # Y53TR and Landing Pad 11 # Y00233. For raised rails you simply need the TimberLine Towers # Y00147. In addition to the...
view full answer... - Roof Rack Similar to Whispbar Recommendation for 2014 Tesla Model S with SunroofI have a solution that will work well for you but Whispbar was actually bought out by Yakima. So to get the most similar roof rack to a Whispbar for your 2014 Tesla Model S with a sunroof, you'd want the Yakima JetStream roof rack part numbers # Y00426, # Y53TR, and # Y00233. With this you'd have a very high quality roof rack like you are wanting, that has aero shaped bars which will allow you to have minimal wind noise.
view full answer... - Availability of a Roof Cargo Basket For 2011 Ford Transit Connect With Fixed Factory Roof MountsI would recommend to use the Yakima Roof Rack System with a Yakima cargo basket. For the roof rack, you will need 3 parts: Landing Pad 11, # Y00233 SkyLine Towers, # Y53TR RoundBar SL Adapter, # Y03536 Round 48 Inch CrossBars for Yakima Roof Rack System, # Y00408 I am including a link to a video review on the Yakima roof rack system. With the Yakima roof rack installed on your vehicle you can then install the Yakima LoadWarrior Roof Rack Cargo Basket, part # Y07070-74. I am including...
view full answer... - Roof Rack Recommendation for 2017 Ram ProMaster City to Use Rhino Rack Batwing AwningLike you mentioned the Rhino Rack Batwing Awning part # RR33200 that you referenced does require a roof rack with top channels so for your 2017 Ram ProMaster City with a naked roof you would need a rack like the Yakima HD Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which does have a track on top of the crossbars.
view full answer... - Recommended Roof Rack for 2017 Subaru Impreza SportI do have a solution for you, however the Rola Sport APE Series Roof Rack referenced in your question is not a confirmed fit for your 2017 Impreza Sport with no existing rails or crossbars. For a similar aero style crossbar, I recommend the Yakima Roof Rack that consists of # Y00421 for the two 50 inch crossbars, # Y53TR for the SkyLine Towers and # Y00233 for the Landing Pads. This roof rack is confirmed to fit your vehicle and has a weight capacity of 165 pounds, although you will also...
view full answer... - Bike Carrying Recommendations for 2012 Mazda 3 HatchbackThe Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
view full answer... - Recommended Roof Rack with Bike and Kayak Carriers on a 2017 Mazda 3 with Fixed Mountig PointsWe do have black roof racks that install into the fixed mounting points on your 2017 Mazda 3 that don't use the clamps around the door frames. Although, you're correct that all of them stick out passed the feet so they aren't the OEM look you're trying to get. The rack I recommend is a Yakima system with their 50 inch JetStream bars which uses: 50 inch JetStream Crossbars # Y00425 SkyLine Towers # Y53TR Landing Pad 11 # Y00233 I've linked a video of the SkyLine towers being installed...
view full answer... - Recommended Heavy Duty Roof Rack for a 2018 Ford FlexIt sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,...
view full answer... - 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier RecommendationFor a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
view full answer...
- Will the Surco Safari Roof Baskets Work with Rola Roof Rack CrossbarsI do have an option that will allow you to mount a Surco Safari Basket to the roof of your 2017 Ram ProMaster City but the crossbars of the Rola Haul-Your-Might Truck Bed Ladder Rack 59742 will not work with the mounting feet used on the ProMaster City Roof Rack by Rola 59633 because the crossbars on the ladder rack are too long for your vehicle. Since the crossbars are different lengths the mounting holes on the feet will not line up with the mounting holes on the crossbar. Also, the...
view full answer... - Method to Reduce Wind Noise from Roof Rack on 2014 Mazda 3Roof rack crossbars do generate noise and some make more noise than others. Round and square bar roof racks tend to be the noisiest and elliptical and aerodynamic bars tend to make less noise. No roof rack will be particularly quiet when you have your sunroof open. That is just the nature of the beast. You can sometimes reduce the noise level of a roof rack by adding a fairing to the front bar, such as Inno's # INA262. These usually help the noisier round and square bar roof racks like...
view full answer... - What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof RackFor your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
view full answer... - Roof Rack for 2012 Ford Transit Connect with Longer CrossbarsThe longest crossbar roof rack we have for your 2012 Ford Transit Connect is the Yakima Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which comes with a similar square HD crossbar to the Rhino Rack you mentioned. This rack will give you 55 inch crossbars.
view full answer... - Which Roof Rack and Multi-Kayak Carrier can be Used With a 2012 Mazda 3 Hatchback?We can get you set up to transport a pair of 10-foot kayaks on your 2012 Mazda 3 hatchback. For a roof rack, I recommend going with the Yakima; it has aero crossbars, # Y00425, which are used in conjunction with the Landing Pad # Y00233 and Skyline Towers # Y53TR that install onto fixed mounting points on your Mazda's roof. To transport your 10-foot kayaks on the Rhino Rack, you can use the Thule The Stacker # TH830. It mounts directly onto the crossbars and utilizes a combination of...
view full answer... - Yakima roof rack for Mazda 2Yes, I confirmed with Yakima that there is a roof rack available for your 2012 Mazda 2 that uses Yakima Round 48 inch Crossbars part # Y00408. To complete the roof rack you would need the following parts: LandingPad 11 part # Y00233 Yakima SkyLine Towers # Y53TR Yakima RoundBar SL Adapter # Y03536 I confirmed this with Yakima.
view full answer... - Roof Rack Recommendation for a 2009 Ford Flex with Vista RoofYou will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Test Fit:
Zack K
Video by:
Andrew K
Written by:
Tyler C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Daron K
Updated by:
Jenny M
Updated by:
Alex H
Updated by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dan B.
5/1/2017
After a year, the landing pads look like new and have worked out spectacularly. Ive tested the pads on/off the car, and they havent affected fuel economy aero drag at all, so I just leave them on. Id highly recommend these, and I appreciate etrailers video tutorial before I purchased the product!