Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack Receiver - 2" Ball

Video Transcript for Review of Stealth Hitches Trailer Hitch Ball Mount and Wiring - SH92MR

Hello neighbors, Steven here with etrailer.com. Today we're looking at this nice towing kit with the ball mount included and the trailer wiring for your Stealth Hitches. It does have a 2" ball and it is a custom fit application. So by custom fit we mean it's specific to certain vehicles. You wanna go to etrailer.com, top center of our homepage, enter your year, make and model in our fit guide. Make sure you're getting the right parts for your specific vehicle.

Now folks, this complete kit will let you use your Stealth Hitch Rack Receiver for towing and this nice detachable ball mount will literally lock up into place into that hitch in place of the receiver attachment. So you already have the Stealth Hitch. It came with a receiver attachment, a square tube that pushes up and locks into place. Well, you take that out, you push this bad boy up in there, you lock it into place. Now you've got a usable ball mount for towing a trailer hitch.

Now the included hitch ball is gonna provide a connection again for your trailer's ball coupler and it's got a nice black powder coat finish on it and it's a nice heavy duty steel so it's gonna resist rust, corrosion and that kind of stuff. It also comes with a nice set of safety chain holders. Those will get bolted in place with the hardware you have and including these two new lock nuts. You're also gonna get the four pole wire connection and it's got a pull hold built into it so you can pull it out easy when you installed it. It also comes with a dust cover that's gonna go over that to keep it clean.

Now it's gonna come with also this nice pulse modulator and it's a converter that's going to keep your wiring on your vehicle safe. So you're gonna hardwire that in place with the included wire here, run it all the way up to your 12 volt battery and that in turn is gonna protect your wiring on the vehicle. And it's also gonna power your trailer's taillights and turn signals. It's also gonna help, again, overloading your vehicle's electrical system. So it's got a built-in safety modulator there and that's gonna help with everything.

All the connectors, heat shrink butt connectors, the connector for the battery, zip ties, double-sided adhesive here that goes in the back of this black modulator and that helps connect that and adhere it to the wall hidden out of place in the back of your vehicle. Now it's does have a gross trailer weight of up to 3,500 pounds. Again, it is a ball that is a 2" ball size, nice limited lifetime warranty. Keep in mind, this system is not rated for weight distribution system, so this will not work with weight distribution. The ball hole diameter here, the hole that goes through or the ball goes through is 1". The base thickness, this hole plate here is 3/4" thick. The total length from the center or from the outside here to the outside is 16-1/4". While from the center of the ball hole to the center of the locking peg is 13-1/2". Well folks that's gonna wrap it up for our look at this nice towing kit again with the included ball mount and trailer wiring to match up to your Stealth Hitch. I'm Steve with etrailer.com. Thank you so much for your time, I hope it's been helpful. Have fun out there on the trails.