Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Built for off-road use, this platform's large, flat surface accommodates loads of all shapes and sizes. Compatible with many Rhino-Rack accessories, including light brackets, cargo bags, and awnings. Requires fit kit (sold separately).
Features:
Specs:
Note: Load capacity of your roof rack is divided by 1.5 when you are driving off-road.
Average Customer Rating: 4.8 out of 5 stars (191 Customer Reviews)
Built for off-road use, this platform's large, flat surface accommodates loads of all shapes and sizes. Compatible with many Rhino-Rack accessories, including light brackets, cargo bags, and awnings. Requires fit kit (sold separately).
Ordered Monday morning and received Saturday. Service and shipping back to normal warp speed
Great product, excellent quality, great finish very sturdy and mounted to my Vortex bars perfectly.
Couple of cons but I'm not going to knock down the review because of it. Product came with instructions that are out of date for the new racks they are shipping. Platform also came with some missing hardware. Two missing nut retainers,two nuts,two screws and two washers. Was able to put it together with Hardware I had on hand..
The Rhino pioneer roof rack and vortex crossbars are going to work great on my Ram Truck with Retrax tonneau cover to help me carry extra gear. I also have the Yakama HD overhaul rack for carrying my kayaks. Everthing fits perfectly!
I called etrailer to verify fitment on my 2013 Ford E-350 XL. Everything arrived sooner than quoted, and instructions were clear. It took me approximately 6 hours to assemble by myself. I had 3 buddies over to put it on the van because it is ~100lbs and 100”x62”. We put towels on top of the van and slowly slid the fully assembled rack on top of the van. It took a while to level everything (30 mins?), but overall went on well and looks great.
The instructions didn’t clarify where the C-channel bars are supposed to be spaced to, but I used basic math skills and spaced each C-channel evenly spaced. It feels very strong. I believe it was 33mm on center for each C-Channel.
Looking forward to camping in a few weeks!
Fantastic rack, easily modified to accommodate tents/cargo/whatever. It's not quiet though, so do yourself a favor and get the faring.
Exactly as advertised! I love this rack. I have it on the top of my 2014 E350. No
Exactly what I needed for my Honda pioneer 1000-5. I can use it for a shooting platform when stopped in high grass or Swampy conditions during hog hunts.
This is a solid and versatile rack. Really well constructed. I bought mine wider than the vehicle for extra space. I found many generic options for attachment accessories. It's flat when I need it to be for airport parking garages. One year later, it's still awesome!
The instructions on etrailer were way better than the ones that came from rhino. The rack is awesome seems to be well built I would highly recommend it to anybody looking at doing any over-landing or tent roof camping
Just perfect, my shipment arrived in a couple of days. There was a hole in the box that may have occured during shipment that resulted in one of the slat being scratched, luckily I had black satin paint so I just soared over it so problem solved. Took me a while to assemble the platform as fherr were a lot of bolts and nuts to turn. But the end result is a nice sturdy platform rack that I will be putting to good use for my family’s upcoming adentures.
Overall, I like the rack. I use it for a hard shell RTT and it has held up well through several camping and off-roading trips. I chose this rack for the low profile look, weight and mounting system.
I am a previous Rhino-Rack owner and have had one on my Wrangler for almost 10 years. They make a fantastic product and when it came time to buy a rack for my Cherokee it was a no-brainer to go with Rhino-Rack. Instructions are great and straight forward and the install is super easy.
Assembly was fairly easy and overall seems like a good product. I did have a couple of screws (2 of the Alloy Locking Tabs did not have the M6x20mm Security Head Screw (black) or associated washers) missing from the package but was still able to use as is. Hopefully I can have the screws and washers mailed to me.
Well I must say I am impressed--with the Rhino Rack and etrailer! This big ole Pioneer platform package arrived really quickly and was in perfect shape in and out--none of this already opened noise you hear about from sketchy vendors. The platform quality is also really good; I didn't expect it to be so good. I also really like how low it sits; they were obviously designing this to fit the Outback just right. I am a happy camper! Thanks etrailer for making this process worry/pain-free.
Love it. Butttttt i had 2 screw holes that wouldn't take a bolt... tried multiple bolts in the holes threads wouldnt take. I jimmy rigged it with some self tapers beside the hole.
I really do like it minus the default threads...
The RINO RACK AND PIONEER PLATFORM are a great addition to my little Wrangler.
etrailer folks were very helpful in determining exactly what I wanted and needed. The assembly instructions are very good - even though there are a lot of parts to assemble. I was able to complete the assembly by myself (with help getting the top off the jeep.) If I can offer a recommendation from my experience, I would pre-assemble the entire unit with the mounting brackets finger-tightened to the platform AND THEN set it on the roof - to insure that the holes needed to be drilled are in exactly the right spot. I had to re-drill two holes and maybe that was my own fault, but until I did, i could not get the platform to rest in the mounting brackets.
All that said, I am VERY PLEASED with the RINO RACK product. It is very secure, easily accessible, very low profile (3" from roof to top of rack), large platform that still allows removal of the Freedom Top on my rig. It will give me the extra carrying capacity as we tow the jeep behind the motor home from Arizona to Alaska and hit lots of back country for tent camping in the process!!
I bought this roof rack to mount on my 2018 Toyota TRD Off Road 4Runner. The reason I purchased it was because of the versatility that this product offers. There are many roof racks out there for my vehicle. Some are cheap and some are expensive. Some racks are smaller and some are full size. I was looking for a rack that wouldn't break the bank as well as cover a majority of the roof (without drilling). I have two young kids and I'd like to get them out more. Hence, buying the 4Runner as well as the rack. This rack will enable me to load a ton of stuff on it in the future such a roof top tent, awning, etc. Even though I'm somewhat handy, the installation did take around 3-4 hours. I did have one other person helping me. I highly recommend having an additional set of hands helping during the installation. The sides rail installation was easier than I thought it would be. The platform itself took longer to install. Overall: very happy with this product. I highly recommend it.
Slik in design, tough in outlook, easy to assemble this is rhino roof rack awesome ready for today and future adventure.
Sturdy and very strong. Just what i needed for my Rooftop tent.
I did a lot of research before settling on this roof platform. I’m really happy with the build quality and once it’s all together it has a lot of strength and versatility. My ONLY complaint is that the “Quick Foot” mounting feet for the factory rail that was sent to me did not have matching key codes. The codes are clearly listed on the boxes and someone at etrailer.com didn’t bother to grab a matching set. Bummer.
After waiting for shipping and finally pulling it all out for the install I was too far into the project to ask for replacement feet. I just installed what was sent.
This fits my 2024 Toyota Sienna that came with the factory roof rack + Cross bars. The material of construction look and feel high quality. The assembly took quite a bit of time because the bolts and nuts were labeled to match the instruction. The instruction could use a little update.
Purchased this about a month ago after having a mediocre cargo basket that started to rust after 2 weeks. This platform is not only more convenient and adaptable but it looks [really] great! Took some time to assemble but I made that every piece fit and lined up correctly. Nice finish and strongly constructed. I should have gotten this first! I also got the matching rail system to complete the set-up. Highly recommended. Shout out the the staff at etrailer for again for the great communication from start to finish!
This platform rack perfect fit to my 2020 DURANGO GT. Easy assembly, easy installation and removal. I bought 2 years ago a trailer hitch receiver (code C13182) from your company and also satisfied with its use. I recommend ETRAILER.COM to all my friends. Thank you.
Great fit with the Rhino Rack backbone for Gladiator and the Bestop Sunrider.
Do you have a question about this Roof Rack?
Condition: Installed
Notes: Item has been installed/test fit.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
8/16/2022
I would like to hear more about your 1 star experience with the Rhino-Rack Platform and etrailer. If you can provide me with more information, I am happy to help you in anyway I can.