Phoenix USA Rear Hub Cover w/ Pop Out - 8 on 275mm - 30mm Lug Nuts - ABS Plastic

Video Transcript for Review of Phoenix USA Wheel Accessories - Vehicle Wheel Hub Cover - PXQ820R

Today we're going to take a look at the Phoenix USA ABS plastic hub cover for a rear wheel with an 8 lug, 275 millimeter bolt circle that uses 20 millimeter lugs. So this is for a quantity of one hub cover. Now this hub cover will upgrade the appearance of your rear truck wheel; it covers the ugly axle hub in the center of your wheel. It does include the hub cover. It includes this pop out center cover and then eight of the screw on ABS plastic lug nut covers for 20 millimeter lugs. All these parts are a durable ABS plastic construction.

They're a nice polished chrome finish. The pop out center is nice because it gives you access to your axle hub without having to remove the whole hub cover.It's a very simple installation. It installs onto the wheels by using these included lug nut covers. All you do is line it up with the lugs on your wheels. Go ahead and push it on.

Take these threaded lug nut covers, put it on there, thread it on there, and once you get them all on you have a nice finished look to your wheel. This is designed to fit a wheel bolt pattern. It's a rear wheel fit that has an 8 by 275 millimeter bolt pattern. It is for a quantity of one hub cover.I am going to snap this pop out center in here and then we're going to give you a measurement of it. You'll notice there's two notches, one here and 180 degrees there's one from it, and then there's two openings here.

So you just sort of line that up. Once you get it lined up, just go ahead and snap it on. So we'll give you the diameter on this. Overall diameter from edge to edge is going to be right at 13 13/16". And the overall height on this is going to be right at 7 3/4" tall.

And if you do have to remove that pop out center, those notches I showed you, one on each side, they're large enough to put a large screwdriver, flat tip in there, twist it, and it'll pop that cover right off.But that should do it for the review on the Phoenix USA ABS plastic hub cover for a rear wheel with an 8 lug, 275 millimeter bolt circle that uses 20 millimeter lugs.