Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.
Features:
Specs:
Average Customer Rating: 4.7 out of 5 stars (3466 Customer Reviews)
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.Although I have not yet put the aero Rhino rack on my car and taken a trip (coming up) I have assembled the entire rack. I do appreciate the quality of construction and design. The product is better than I expected. I did watch the video on how to mount the rack on your vehicle, but I did not see a video on how to assemble the legs to the bar. I found it difficult to insert the clamps into the rubber pads. More documentation would be helpful, maybe there is a trick to it. Instructions on the best way to cut the measurement sticks would also be helpful. All and all, it looks like a great product for the price.
Highly Recommended. This was part of a complete solution including Aero Bars and DK Fit Kit for my Toyota Avalon. I was VERY impressed with the overall fit and sturdiness of the Rhino Rack Solution. The rack and installation is VERY well thought out. Also, the wind noise at 70 MPH is small.
The installation instructions were fairly easy to follow and everything was there as advertised. So far, no noticeable road noise. I was thrilled with the service, we received our roof rack on our doorstep two days after we ordered it. Thanks, etrailer! We are using this for extra luggage storage on a road trip, so we can take the sedan.
The Rhino Rack is a well designed product and very well made - The fit for my car worked well and it took about 45 minutes to assemble, adjust and install. It will work well for transporting bikes and surfboards. The assembly kit included a long shaft hex wrench and handle which made assembly and installation much easier.
The rack worked great on our annual trip from Cape Cod to Fla. easy on and easy off.
Ease of order, receipt, installation and excellent customer service is what I received in this order.
Thank you, e-trailer!
Takes a little while to assemble the rack bars.
The stickers are great I can mark the positions after measuring the distance between the bars.
One of the screws is underneath the bar; it is hard to reach to tighten the bars.
Finally, I got the roof rack installed and it looks good.
Pretty nice rack system. Held up to my 90lb canoe no problem. However a piece did fly off on the highway and the "locking" bar end cap can pull off super easy.
The directions were ok. There is some stuff you have to kind of figure out for yourself, mainly the roof trim. I plan to leave the rack on so I drilled theough the trim
Just followed all the etrailer website prompts for my naked roof Toyota Matrix and it set me up with the three packages needed- rails legs and fitkit. Installed easily enough. I like the little arrow stickers hidden in the door jams for fast re-install later. Held two 10’ kayaks on a 2 hr journey with ease.
This is a perfect fit for our 2015 Prius V with "naked" roof. Instructions were clear and accurate, and the bars are solid and able to support our canoe and kayak easily. We added the air deflector, as there was a bit of wind noise, but now there is none. Great product at much lower price than the big names.
Absolutely love the Rhino Rack. Easy to install (watch the [online] video). Looks GREAT. Hauls my kayaks no problem. Very well made and I highly recommend this product.
The Rhino 2500 series is well built. The etrailer customer service person Trevor W. was great. He was so helpful in getting the right components for my Rhino 2500 roof rack to mount to my 2010 Silverado. Thanks for the help Trevor.
This was the kit for my 2020 equinox. The spacing of the feet on the vortex aero bars was incorrect I had to use the Euro sizes. Went back and forth with customer service trying to get confirmation that was the right size but it never was confirmed. Everything is installed now and sturdy.
Seemed to work well with my 2012 Kia Soul. I have only had it on my car for a day at writing this so I can't really give it five stars. I would bump it up to five stars once its been on for a few months. Easy to install, and after doing a bit of research Etrailer.com Had the best deal, and support for installation.
Once installed the product is very sturdy and looks great. But the directions are hard to follow because of the separate components and would have been really tough without the video which was great. I have one problem, how can I eliminate the annoying wind sound when driving when nothing on the rack. I saw a video where wrapping a line around the crossbar can help. It has helped a lot but not completely. Is there another secret for this?
Installed this and 65" Vortex Areo crossbars on a 2015 RAM 5500 chassis cab/crew cab. It is listed to fit 1500 to 3500 RAM's and neither Rhino-Rack or etrailer would confirm it would fit the 5500. My research suggested there was not much, if any difference, between the 3500 and 5500 crew cab, so ordered it any way. Installation was relatively easy, fit seemed to be good and have made multiple 200-300 mile trips with a 75lb kayak. Good price, great customer service and fast delivery through etrailer.
The roof rack is great, just pretty pricy, by me standards.
My only problem with the whole experience was that the roof rack comes in there separate packages. In my order, one package was omitted, which created some confusion. I had to go back to the company and request that the 3rd package be sent.
Otherwise I'm happy with the purchase.
I responded to a previous request fro feedback, so I'm not sure why I'm being asked again, but . . .
Customer support was great. After reading the instructions and watching the video on how to install the Rhino Rack installation went well. The ski rack has one draw back, if you leave car out over night with skis locked in the ski rack, every thing can be easily stolen. All you need is an Allen wrench to remove the ski rack with the skis. The roof rack has locking covers the prevent theft of the roof rack. The ski rack can be easily removed from the roof rack.
Fairly easy installation. Read the instructions thoroughly before hand and get familiar with the parts. Take care when installing mounting studs onto car itself so as not to strip or cross thread them. Once installed they look great.
Easy assembly and installation. Pay careful attention to pad direction as shown in instruction sheet for the fit kit. One gripe: one end-cap refuses to lock (blue plastic key lock). Had to tape it on so I don’t lose it.
All items ordered were as described wind were easy to install . The shipping was less than stellar . Tforce sat on the items for 3 business days before finally calling . No tracking was provided for tforce till I called in to etrailer questioning why shipment went from ups to T FORCE . Driver from t force claimed he could not get into address location per length of his trailer . Had to meet driver at another address . Came back to original delivery address and fed ex freight was sitting in parking lot just fine ( had same size trailer as TFORCE ) . Tforce Driver was basically being lazy by not coming to original address . Hope etrailer changes shipping companies
This review covers the Rhino Rack 2500 Vortex Aero crossbars and associated parts (DK284, RRRLKVA, RRVA137S-2) for a naked roof installation on a 2018 Honda CR-V.
Very solid racks. We just took our first trip using them and the didn't budge. As recommended, a few days after installing, I tightened the bolts a bit. I'm not sure they needed it--just a little insurance.
The installation process was clear, but fairly detailed. It would be easy to miss a step, so take your time. Also, I tried a couple shortcuts in the order when installing on the car, but had to back track. So, go in the order they give you.
The racks easily supported our filled "pod" and a couple surfboards, strapped side-by-side. Sorry, no photos of the rack loaded. One thing to watch out for is that our old Thule pod almost didn't fit because of the thickness of the racks. I had to loosen the bolts almost entirely.
Of note: I feel that although I followed the measurements to the millimeter, the fit on our 2018 Honda CR-V wasn't exact. Where the pads sit on the roof of the car didn't align perfectly. I could have adjusted this by just re-trimming the rubber pads that go in the channels, but it's not a big deal, so I just left it.
Finally, I do have one concern. The angle of final installation doesn't really protect the racks from theft very well. The plastic plate that locks over the screw would allow someone with the proper tool to get up under it and loosen the bolts. That being said, someone so inclined could also just break the little plastic door or drill a hole in it to access the bolt. So, I guess it's just a deterrent anyway.
Overall, I'm very happy with the racks and etrailer.com! Despite shipping delays due to Covid-19, they were able to get the racks to me in time for an upcoming trip. I did choose to expedite shipping, but the cost was very reasonable.
These were exactly the right part for my car. They were easy to put on the crossbar kit. The crossbar kit also worked great. I can't imagine how a more expensive set would have worked better than the Rhino Rack we bought.
I bought the roof rack to carry kayaks back and forth from Pennsylvania to Florida. The rack is solid and performs that task very well. My plan was to take the rack off and on but I decided to just leave it on. I do notice some wind noise since I've added the rack but it does not distract me and I would say that it is not excessive but it is noticeable.
I did have problems during the installation. I mounted the racks on a Ford 250 super duty. And the instructions were very clear as to where the feet that's support the rack where to be installed. Plastic strips are cut and the feet that support the rack on the roof push up to the cut plastic strips and that is what determines placement. I read the instructions several times and had seen an installation on another truck owned by a friend of mine. When I pushed the feet to the proper position I could not attached the clamps from the rack feet to the rain gutter on the truck which holds the whole assembly on the roof. They were too short. I spoke to Etrailer and a consensus was that I had cut the strips correctly. Etrailer's input of course was over the phone and they could not actually see or measure anything that I did. Nevertheless, in order to install the rack I had to move the feet on each side a bit closer to the rain gutter on the truck. I did not think that this would make any difference and based on the performance I have not noticed any problems. I would have given this product and excellent rating if I did not have to deal with the little problem that I had with the fit. As I said I have not taken it off the roof and I reach up and check it now and then and it's as solid as the day I put it on.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.