Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings - Class V

See what our Experts say about this Derale Transmission Coolers

• Fittings To Attach a Transmission Line to the Derale 25-Row Stacked-Plate Cooler D52506
  The Derale 25-Row, High-Performance, Stacked-Plate Cooler part # D52506 comes with -10 AN female fittings. It also comes with a reducer that adapts this -10 AN female fitting to a male -6 AN fitting (see photo) so that you can then use the Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting part # D98200. If the Derale 25-Row, High-Performance, Stacked-Plate Cooler did not come with this reducer then please just let me know but it should have. In regards to the other fitting you are looking...
  view full answer...
  
• Can Stacked Plate Transmission Cooler Install in 2009 Chevy Avalanche
  Yes, the Derale transmission cooler part # D52506 does fit your 2009 Chevy Avalanche but to install it you are going to want the snap in adapter part # D13035 and the rubber line part # D13016 with the Derale -6 AN Female Barb Fitting # D98200 to complete the install.
  view full answer...
• Does Transmission Cooler part # D52506 Come with Install Hardware and Lines/Fittings
  The Derale Stacked Plate Transmission Cooler part # D52506 that you referenced does not come with an install kit so you'll also need to go with the part # D13065 as well to provide the mounting hardware and the hoses/lines/fittings.
  view full answer...
• Derale Class V Transmission Cooler for 2011 Silverado 5.3L
  The Derale high-efficiency Class V stacked plate transmission cooler # D52506 can replace your current cooler as long as you have the space for mounting it (it measures 13W x 9-3/16 x 2). This cooler will work well as a replacement for the KNP and will provide better cooling. You can install it with the 6AN fittings facing in any direction. The kit includes just the core and the aluminum 6AN fittings. If you need to connect to hose barb oil lines you can use 6 AN Female Swivel Fitting...
  view full answer...
• Parts Needed To Install a Derale High-Performance, Stacked-Plate Cooler on a 2015 Chevrolet Tahoe
  I do have an option for you but the part that you referenced, the Bracket Kit for Derale High Performance Stacked-Plate Coolers part # D50020 is just a bracket kit for a stacked-plate cooler like the Derale 25-Row, High-Performance, Stacked-Plate Cooler part # D52506. In order to use the above stacked-plate cooler you will need a few items which I have attached for you below but they will vary based on what size transmission lines your 2015 Chevrolet Tahoe uses. The most common is 3/8"...
  view full answer...
• Thermostatic Fan For Derale 25-Row Stacked Plate Cooler
  I recommend attaching the Derale 8" Dyno-Cool Straight-Blade Electric Fan with Thermostat Control # D16308 to your Derale 25-Row, High-Performance, Stacked-Plate Cooler # D52506. This fan having the thermostatic control will turn on when temperature exceeds the temperature you set on the controller.
  view full answer...
• Will a Stacked Plate Transmission Cooler Fit a 2006 Chevy Avalanche
  You can install transmission cooler # D52506 on your 2006 Chevy Avalanche because coolers are not vehicle specific. If you have the available space under the hood you can install it. The cooler is 13" wide x 9-3/16" tall x 2" deep. It does not come with hose, clamps, or provisions to mount it. To mount it you can use kit # D50020. For clamps use # D13008. And for hose use # D13017. And to avoid cutting and flaring factory lines you can use fitting # D13035.
  view full answer...
  
• Where Are Derale Products Made
  Mike, according to Derlae, their parts like # D52506 are 100% made in the USA.
  view full answer...
• 3/8" Hose Adapter Needed for Derale 25-Row Stacked-Plate Cooler with -6 AN Fittings
  Yes, the adapter you need for the Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings # D52506 is part # D98200 which is the Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting. This will allow you to use your 3/8" hose that you mentioned.
  view full answer...
• Transmission Cooler Recommendation for 2004 Chevy Silverado
  Stacked plate coolers like the Derale part # D52506 are the most efficient style of fluid cooler. This would be our best recommendation as it will cool the fluid the best. 290 degrees is pretty hot for tranny fluid so installing a cooler would be a great option.
  view full answer...
• Transmission Cooler Recommendation for a 2015 Toyota 4Runner
  Transmission coolers don't have specific fits, but if you have room for the # D52506 in front of your radiator/AC condenser then it would work well. It measures 13" Wide x 9-3/16" tall x 2" deep. This is one of the most efficient coolers on the market that would work great on your vehicle. To install this cooler you will need a few other components. Part # D50020 for a bracket kit, part # D98200 for a fittings (you'll need two of these), hose clamps part # D13008, and rubber hose part # D13017.
  view full answer...
• Recommended Transmission Cooler for a 2013 Chevrolet Tahoe with the 5.3L V8 Engine
  The best transmission cooler to use on your 2013 Chevrolet Tahoe will be the largest one you have space available for in front of your radiator/condenser behind your grill. Unfortunately, we have not test fit any transmissions coolers on your Tahoe yet but we have test fit the Derale Series 8000 Plate-Fin Transmission Cooler Kit part # D13504 on a similar 2009 GMC Yukon and found this to be a good fit therefore will more than likely work for you as well. This cooler will do a great job...
  view full answer...
• Transmission Cooler Recommendation for a 2005 Allegro Open Road 32BA on Workhorse Chassis
  Transmission coolers are not vehicle specific so you can install one on your RV. Generally we recommend going with the largest cooler that will fit in the available space under the hood. Or you could go with a stacked plate cooler that is smaller but more efficient. I actually recommend the stacked plate design because they are so efficient. For a kit that comes with a cooler, mounting hardware, hose, and fittings use # D13403. I have also included a link to our help article on transmission...
  view full answer...
• Transmission Cooler For 2007 Ford F150
  You can indeed install a cooler like the # D52506 in place of the existing factory cooler, but you might consider installing it inline between the radiator and transmission as outlined in the help article I've provided. This will provide additional cooling which will work great because unless you live in a very cold climate, you really can't over cool a transmission. You'll need one of two fittings. Use kit # D13024 for vehicles with 1/2"-20 thread on trans line fitting, or use kit # D13025...
  view full answer...
• Are Derale -6 AN Female Swivel x 3/8" Barb Hose Fittings Brass?
  The Derale -6 AN Female Swivel x 3/8" Barb Hose Fitting # D98200 you were referring to are not brass, it is an aluminum fitting. The Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings # D52506 will work for you so long as you have the required space for it to fit; his cooler measures 13" Wide x 9-3/16" tall x 2" deep.
  view full answer...
• Recommended Transmission Cooler for a 2017 Kia Sedona
  I do have an option for you but the Derale 25-Row High-Performance Stacked-Plate Cooler part # D52506 would be a bit overkill for your 2017 Kia Sedona nor do I think you would have the space to install this. Instead, I recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit part # D13504 which will be plenty for your Sedona. In regards to installation, aftermarket transmission coolers are not really what I would call plug and play so you will need to do a bit of alterations...
  view full answer...
• How to Determine Fit of Oil Cooler for 1998 Ford F-150
  When it comes to transmission coolers they are not a vehicle-specific fit so any cooler, including the Derale 25-Row, High-Performance, Stacked-Plate Cooler # D52506, will fit depending on how much space you have in your 1998 Ford F-150; this one is 13" Wide x 9-3/16" tall x 2" deep. If you take a look at the linked help article on transmission coolers you can see exactly how they fit. A stacked-plate cooler is a great, heavy-duty option but if the 2" depth is too much another option is...
  view full answer...
• Can I Bypass the Factory Transmisson Cooler on a 2007 Nissan Frontier
  We do not recommend bypassing the factory cooler with a supplemental transmission cooler, but if you are going to do so, I strongly suggest using the largest and most effective cooler that will fit in your engine compartment. Keep in mind, these transmission coolers are designed to be supplemental coolers to the vehicle's cooling system, not independent coolers. As far as coolers go, the most effective design is a stacked-plate cooler like the Derale High-Performance Transmission Cooler,...
  view full answer...
• Can I Use Derale Stacked Plate Cooler To Replace Stock Cooler in Chevy Suburban With K5L Package
  The Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings part # D52506 is designed to be used as a supplemental cooler to the factory K5L heavy-duty cooling package in the 2010 Chevy Suburban 2500 however, if your factory transmission cooler is leaking you can bypass it although it is not recommended by Derale. Since you are most likely towing and bypassing your factory cooler you want to use the largest transmission cooler you can get to fit so the 13" wide x 9-3/16"...
  view full answer...
  
• Will the Derale 25-Row Stacked-Plate Cooler Fit a 2005 Chevy Silverado 2500
  The stacked-plate transmission coolers like the Derale 25-Row, High-Performance, Stacked-Plate Cooler with -6 AN Fittings part # D52506 do offer superior cooling power when compared to plate-fin and tube-fin designs. However, they are also much thicker at 2" which means you will need to make sure you have this much depth in addition to the length and height of 13" wide x 9-3/16" tall. There should be plenty of space behind your grille for this cooler so I don't think you will have any issues....
  view full answer...
• Installation of Aftermarket Transmission Cooler to Replace Leaking OEM Cooler
  The general rule is that transmission fluid cannot be cooled too much, so using the largest cooler that will fit is a good idea, especially if you are towing. Since you intend to completely bypass the OEM cooler you will want to use the largest aftermarket cooler that can fit in front of your AC condenser. This is the optimum location for the cooler since it receives maximum air flow. You will also want to use the highest-efficiency cooler, a Class V stacked plate type like # D52506. This...
  view full answer...
• High-Rated Transmission Cooler Recommendation for a 2007 Chrysler Aspen
  You might need a more efficient transmission cooler for optimum cooling on your 2007 Chrysler Aspen. Stacked plate coolers are the most efficient, such as # D52506. If the cooler you have now is an aftermarket external cooler then you likely won't need additional parts to run the lines to and from it but you will need hose barb fittings that can mate up with the cooler, # D98200. Or you could get a kit, # D13403, which has a smaller core but it is still Class V rated.
  view full answer...
• Best Way To Add A Standalone Transmission Cooler To A Classic Car
  The majority of our transmission coolers are supplemental, meaning they are designed to aid the radiator in cooling the vehicle's transmission fluid. However, I do have a few standalone options that should work just fine to cool your classic mustang's transmission. As a general rule of thumb, you will want to use the largest cooler in the provided space you have available. For a non-remote mounted transmission cooler, the best place to place the cooler is in front of your radiator behind...
  view full answer...
• Stacked Plate Cooler Transmission Cooler Recommendation for 2006 Ford Expedition
  Yes, the Derale Stacked Plate Cooler part # D13403 is a Class V transmission cooler that comes with all the needed install hardware and would fit and work well for you. It measures 13" Wide x 7-5/16" tall x 2" deep which would easily fit in front of your radiator and would be incredibly efficient.
  view full answer...
  

Do you have a question about this Transmission Cooler?